Diverse Nano Dimension of SDS, PEG and CTAB Roofed MgO Nano Powder Synthesized by Co-precipitation Method

نویسندگان

  • Deepa Baskaran PG Research Department of Physics, Presidency College, Chennai, Tamilnadu, India
چکیده مقاله:

The SDS, PEG and CTAB roofed MgO nano powders were synthesized by co-precipitation method.  The sintered nano powders was shown Fm-3m space group with cubic phase obtained by the XRD pattern. The lattice strain was calculated to be used Williamson-Hall equations (W-H). The formation of Mg-O bond and hydroxyl radicals on the surface were confirmed by the FTIR analyses. The TEM revealed that the morphology of sintered nano powders has three different dimensions (0D, 1D, 2D) with average crystallites size was about ̴ 20-80 nm and length usually 200-500 nm. The UV-DRS spectra show that the ionic surfactants roofed MgO leads to band gap shrinkage. The evaluated optical band gap energy is Eg= 4.10eV, 3.41eV and 3.12eV for SDS, PEG and CTAB-MgO nano powder respectively.  Also extending light absorption towards the visible region due to decrease in crystallite size of surfactants roofed MgO nano powders utilizing for photocatalytic purpose and opto electronic devices.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis of Nano-Structured La0.6Sr0.4Co0.2Fe0.8O3 Perovskite by Co-Precipitation Method

Nano-structured lanthanum strontium cobalt ferrite, La0.6Sr0.4Co0.2Fe0.8O3 (LSCF), was successfully synthesized via co-precipitation method using metal nitrates as starting materials. Effects of precipitating agent and calcination temperature on the phase composition and morphology of synthesized powders were systematically studied using X-ray diffraction (XRD) and field emission scanning elect...

متن کامل

Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method

In this paper, titanium dioxide nano-particles were synthesized by sol-gel method in acidic atmosphere. The microstructure, morphology, optical band gap, and hydrophilicity of the sample were studied. Optical band gap of titanium dioxide was probed via Diffuse Reflectance Spectra (DRS) and contact angle (CA) was measured to investigate surface activity. XRD analysis was used to study crys...

متن کامل

Structural properties of MgO Nanoparticles: Synthesized by Co-Precipitation Technique

Metal oxide nanomaterials are important and excellent materials, because of its special properties like chemical stability, high photo catalytic activity, high electric permittivity, non-toxic nature. So it is used in various applications like optical, electrical, electronic, antiseptic, antibacterial, environmental, semi conductors and catalytic devices. Present work focused on to synthesis of...

متن کامل

synthesis of nano-structured la0.6sr0.4co0.2fe0.8o3 perovskite by co-precipitation method

nano-structured lanthanum strontium cobalt ferrite, la0.6sr0.4co0.2fe0.8o3 (lscf), was successfully synthesized via co-precipitation method using metal nitrates as starting materials. effects of precipitating agent and calcination temperature on the phase composition and morphology of synthesized powders were systematically studied using x-ray diffraction (xrd) and field emission scanning elect...

متن کامل

Structure and Magnetic Properties of Oxide Nanoparticles of Fe-Co-Ni Synthesized by Co-Precipitation Method

Oxide nanoparticles of Fe-Co-Ni were prepared in six different compositions by co-precipitation method. The as-synthesized nanoparticles were characterized by X-Ray Diffraction (XRD), Field Emission Scanning Electron microscope (FESEM), Fourier Transform Infrared (FT-IR) and Vibrating Sample Magnetometer  (VSM). It was found that the nanoparticles had mean crystalline size of 30-55 nm and spher...

متن کامل

Magnetic Properties of Sr-Ferrite Nano-Powder Synthesized by Sol-Gel Auto-Combustion Method

In this paper, strontium ferrite (SrO.6Fe2O3) was synthesized by the sol-gel auto-combustion process. The thermal behavior of powder obtained from self-propagating combustion of initial gel was evaluated by simultaneous differential thermal analysis (DTA) and thermo gravimetric (TG), from room temperature to 1200°C. The as-burnt powder was calcined at various temperatures from 700-900°C to achi...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 7  شماره 3

صفحات  189- 193

تاریخ انتشار 2017-07-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023