Development of Corrosion Resistant Zn-Ni-TiO2 Composite Coatings
نویسندگان
چکیده مقاله:
The Zn-Ni-TiO2 composite coatings were developed on mild steel by electrodeposition method. The bath constituents (ZnSO4.6H2O, NiSO4.6H2O, TiO2, thiamine hydrochloride) and operating conditions (temperature and pH) were optimized by Hull cell method, for peak performance of the coating against corrosion. The coatings were prepared by galvanostatic method at room temperature. The effect of current density (CD), on coating parameters, such as corrosion resistance, thickness and throwing power were studied. The micro hardness of the composite coating was investigated. Potentiodynamic polarization (PP) and electrochemical impedance spectroscopy (EIS) methods were used to assess the corrosion resistance of Zn-Ni-TiO2 composite coatings at different current densities. Surface morphology and composition of the composite coatings was investigated using Scanning Electron Microscopy coupled with energy dispersive spectroscopy (SEM/EDS). Atomic force microscopy (AFM) analysed the topographical surface of the coatings. A new and economical sulphate bath, for bright Zn-Ni-TiO2 composite coating on mild steel has been proposed, and results are discussed.
منابع مشابه
Corrosion Protection of Steel Using Nonanomalous Ni-Zn-P Coatings
A novel technique for obtaining nonanomalous Ni-Zn-P coatings with high Ni content ~74 wt % as compared to 15-20 wt % in the conventional plating method! has been developed. These coatings show promise as a replacement for Cd in sacrificially protecting steel. Ni-Zn-P coatings were deposited using an electroless method from a solution containing NiSO4 , complexing agent and ammonium chloride. V...
متن کاملEffect of TiO2 Particle Concentration on Microstructure and Mechanical Properties of Ni-P-TiO2 Composite Coatings
Ferritic stainless steels are widely used in equipment, including parts in turbines, electrical industries, aerospace, automotive and decorating industries. One of the problems with this type of steels is their low wear resistance. One of the ways to overcome this problem is to apply a wear-resistant coating on the surface of steel. In this research, nickel phosphorus-titanium oxide coating was...
متن کاملElectroless Ni–P composite coatings
This review outlines the development of electroless Ni–P composite coatings. It highlights the method of formation, mechanism of particle incorporation, factors influencing particle incorporation, effect of particle incorporation on the structure, hardness, friction, wear and abrasion resistance, corrosion resistance, high temperature oxidation resistance of electroless Ni–P composite coatings ...
متن کاملDevelopment of Antifouling and Corrosion Resistant Coatings for Petrochemical Compressors
Two coatings have been developed for petrochemical compressor antifouling and corrosion resistance purposes. One is a multilayer composite coating with a modified polytetrafluoroethylene (PTFE) impregnated organic topcoat, which gives it superior antifouling performance to the similar coating that has been used by the compressor original equipment manufacturers (OEMs). The other is a high-phosp...
متن کاملCurrent Research Status of Corrosion Resistant Coatings
The recent patents on corrosion resistant coatings were reviewed in this paper. The materials of corrosion resistant components, e.g., metals and alloys, ceramics, polymers as well as composite materials, developed for environmental, economic and other concerns were discussed. In addition, the novel methods for forming the coatings, including the powder floating by vibration and the precursor g...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 12 شماره 4
صفحات 569- 579
تاریخ انتشار 2020-04-30
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023