DESIGN OPTIMIZATION OF RC FRAMES UNDER EARTHQUAKE LOADS

Evaluation of the Seismic Response of Single-Story RC Frames under Biaxial Earthquake Excitations

This paper summarizes the lessons learned from a full-scale test on two RC frame prototypes that have recently been tested on LNEC shaking-table using four pairs of biaxial synthetic ground motion records during 15WCEE Conference (2012). The reference structures are two single-story RC frames which are geometrically identical but with different reinforcement details. The simplified inelastic mo...

Earthquake Response Evaluation of RC Frames using High Strength Steel

To achieve better structural performance, lesser damage along with minimum residual displacements is a main objective of earthquake resistant design. In ordinary steel reinforced concrete frames, chances of severe damage because of the lower strength of conventional steel are always present during strong earthquakes. With the invention of high-strength steel (HSS) it can be anticipated that its...

TOPOLOGY OPTIMIZATION OF 2D BUILDING FRAMES UNDER ARTIFICIAL EARTHQUAKE GROUND MOTIONS USING POLYGONAL FINITE ELEMENT METHOD

In this article, topology optimization of two-dimensional (2D) building frames subjected to seismic loading is performed using the polygonal finite element method. Artificial ground motion accelerograms compatible with the design response spectrum of ASCE 7-16 are generated for the response history dynamic analysis needed in the optimization. The mean compliance of structure is minimized as a t...

TOPOLOGY OPTIMIZATION OF STRUCTURES UNDER TRANSIENT LOADS

In this article, an efficient methodology is presented to optimize the topology of structural systems under transient loads. Equivalent static loads concept is used to deal with transient loads and to solve an alternate quasi-static optimization problem. The maximum strain energy of the structure under the transient load during the loading interval is used as objective function. The objective f...

progressive collapse evaluation of rc symmetric and asymmetric mid-rise and tall buildings under earthquake loads

plan irregularity causes local damages being concentrated in the irregular buildings. progressive collapse is also the collapse of a large portion or whole building due to the local damages in the structure. the effect of irregularity on the progressive collapse potential of the buildings is investigated in this study. this is carried out by progressive collapse evaluation of the asymmetric mid...

Nonlinear Analysis of Knee-braced Frames under Earthquake Loadings