Design of a High-Bandwidth Y-Shaped Photonic Crystal Power Splitter for TE Modes
نویسندگان
چکیده مقاله:
In this paper, a Y-shaped power splitter based on a two dimensional photonic crystal (PhC) for TE modes is designed and optimized. A triangular lattice of air holes is used for Y-shaped power divider. For analyzing these structures, plane wave expansion (PWE) and finite difference time domain (FDTD) methods are used. The simulation results show that more than 98% of the input power is transmitted to the outputs and the structure has just less than 2% reflected power. According to the simulation results this structure is suitable for high bandwidth optical integrated circuit at the 1550 nm wavelength.
منابع مشابه
A New Design of Photonic Crystal Filter and Power Splitter Based on Ring Resonators
Here, we propose an optical filter and an optical power splitter based on two-dimensionalphotonic crystal all circular ring resonators. These structures are made of a square lattice ofsilicon rods with the refractive index n1=3.464 surrounded by air (with refractive indexn2=1). First, we have designed the filter and by using that, we designed a power splitter. Thetransmission efficiency and Qua...
متن کاملDesign of Photonic Crystal Polarization Splitter on InP Substrate
In this article, we suggested a novel design of polarization splitter based on coupler waveguide on InP substrate at 1.55mm wavelength. Photonic crystal structure is consisted of two dimensional (2D) air holes embedded in InP/InGaAsP material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. The photonic band gap (PBG) of this structure is determined using t...
متن کاملa new design of photonic crystal filter and power splitter based on ring resonators
here, we propose an optical filter and an optical power splitter based on two-dimensionalphotonic crystal all circular ring resonators. these structures are made of a square lattice ofsilicon rods with the refractive index n1=3.464 surrounded by air (with refractive indexn2=1). first, we have designed the filter and by using that, we designed a power splitter. thetransmission efficiency and qua...
متن کاملdesign of photonic crystal polarization splitter on inp substrate
in this article, we suggested a novel design of polarization splitter based on coupler waveguide on inp substrate at 1.55mm wavelength. photonic crystal structure is consisted of two dimensional (2d) air holes embedded in inp/ingaasp material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. the photonic band gap (pbg) of this structure is determined using t...
متن کاملfive-port power splitter based on pillar photonic crystal
designing a power splitter with five ports has been shown in this article. in order to prevent the direct coupling between waveguides, a t-shaped structure with an appropriate distance has been used. the coupling between the parallel photonic crystal waveguides is based on multimode interference, while selecting the output efficiency is performed by setting the refractive coefficients and radiu...
متن کاملPhotonic Crystal Waveguide 1x3 Flexible Power Splitter for Optical Network
A compact 1x3 power splitter based on Photonic Crystal Waveguides (PCW) with flexible power splitting ratio is presented in this paper. Multimode interference coupler (MMI) is integrated with PCW. The device size reduction compared with the conventional MMI power splitter is attributed to the large dispersion of the PCW. Band Solve tool is used to calculate the band structure of PCW. Finite Dif...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 12 شماره None
صفحات 33- 42
تاریخ انتشار 2018-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023