Cross Entropy-Based High-Impedance Fault Detection Algorithm for Distribution Networks
نویسندگان
چکیده مقاله:
The low fault current of high-impedance faults (HIFs) is one of the main challenges for the protection of distribution networks. The inability of conventional overcurrent relays in detecting these faults results in electric arc continuity that it causes the fire hazard and electric shock and poses a serious threat to human life and network equipment. This paper presents an HIF detection algorithm based on quantifying the nonlinear and asymmetry features of HIF waveforms. To this end, first, the substation current is sampled and then, the superimposed component of cross entropy signal calculated by comparing two subsequent half cycles of the current signal is determined as the HIF detection criteria. On the other hand, to overcome the challenge of the similar transient of device switching and HIF, the time duration of transient continuity is considered as the constraint of the proposed algorithm. The proposed scheme satisfactory works in the presence of nonlinear loads and does not need for training dataset, transformations, and calculation of harmonic and symmetrical components. The effectiveness of the proposed HIF detection algorithm is demonstrated using the time-domain simulation of IEEE 13 node test system.
منابع مشابه
fault location in power distribution networks using matching algorithm
چکیده رساله/پایان نامه : تاکنون روشهای متعددی در ارتباط با مکان یابی خطا در شبکه انتقال ارائه شده است. استفاده مستقیم از این روشها در شبکه توزیع به دلایلی همچون وجود انشعابهای متعدد، غیر یکنواختی فیدرها (خطوط کابلی، خطوط هوایی، سطح مقطع متفاوت انشعاب ها و تنه اصلی فیدر)، نامتعادلی (عدم جابجا شدگی خطوط، بارهای تکفاز و سه فاز)، ثابت نبودن بار و اندازه گیری مقادیر ولتاژ و جریان فقط در ابتدای...
High Impedance Fault Detection On Distribution Feeders
The ability to detect High Impedance (HiZ) faults has been a topic of research and development for over 30 years. About seven years ago, products began to appear on the market that could securely perform this function. Over this time period, several hundred HiZ detection devices have been placed in service and have performed to expectations. This paper reviews the operating principle of HiZ fau...
متن کاملDetection of high impedance faults in distribution networks using Discrete Fourier Transform
In this paper, a new method for extracting dynamic properties for High Impedance Fault (HIF) detection using discrete Fourier transform (DFT) is proposed. Unlike conventional methods that use features extracted from data windows after fault to detect high impedance fault, in the proposed method, using the disturbance detection algorithm in the network, the normalized changes of the selected fea...
متن کاملHigh Impedance Fault Detection using LVQ Neural Networks
This paper presents a new method to detect high impedance faults in radial distribution systems. Magnitudes of third and fifth harmonic components of voltages and currents are used as a feature vector for fault discrimination. The proposed methodology uses a learning vector quantization (LVQ) neural network as a classifier for identifying high impedance arc-type faults. The network learns from ...
متن کاملHigh impedance fault detection in power distribution networks using time–frequency transform and probabilistic neural network
An intelligent approach for high impedance fault (HIF) detection in power distribution feeders using advanced signal-processing techniques such as time–time and time–frequency transforms combined with neural network is presented. As the detection of HIFs is generally difficult by the conventional over-current relays, both time and frequency information are required to be extracted to detect and...
متن کاملWavelet Transform Based Algorithm for High- Impedance Faults Detection in Distribution Feeders
This paper presents a wavelet transform based technique for high-impedance faults detection in power distribution feeders. In this study, accurate electrical models for a HIF and capacitor switching event on a power network are developed and simulated using MATLAB. The analysis of the resulted fault signals, using the Discrete Wavelet Transform (DWT) yields single-phase current and voltage in t...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 8 شماره 15
صفحات 71- 80
تاریخ انتشار 2019-09
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی برای این مقاله ارائه نشده است
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023