Consecutive Application of Organic Matter and Sodicity on Secondary Particle Size Distribution

نویسنده

چکیده مقاله:

This study investigated the effect of rate and type of organic matter, and consecutive application of sodium on secondary particle size distribution. At first, a cropland soil was treated with two organic matter (manure and straw stubble) at different rates of 0%, 1% and 5%, with three types replicates during 4 months. Subsequently, four levels of SAR (0, 1, 10 and 30) were added to the pretreated samples through irrigation water. The results indicated that among different treatments, straw stubble (5%) led to the most frequency of aggregates >1 mm and 0.25-1 mm. It was found that with increasing organic matter rate, the size and stability of aggregates increased. Aggregates >0.25 mm were decreased with increasing the irrigation water SAR value, while this reduction was lower for higher rates of organic matter. This indicates that the effect of sodium on aggregate dispersion depended on the rate of organic matter. Also, by increasing the SAR values, the frequency of particles in the fractions of 0.25< and 0.125< was increased. At higher levels of SAR, aggregates >1 mm showed more sensitivity against dispersion than those in the 0.25–1 mm fraction. The findings of this study revealed that besides the type and rate of organic matter, the SAR value of irrigation water is effective in particle size distribution. Burning straw stubble after harvesting lead to aggregate instability and increased soil environmental erosion .

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Pollutant and organic matter content in sediment particle size fractions

In a partly urbanized catchment to the south of Trier, Germany, selected sediment samples were separated into different size fractions ranging from <2 urn to 200 urn. Each sample fraction was analysed for heavy metals, poly chlorinated biphenyls (PCB), poly cyclic aromatic hydrocarbons (PAH) and organic carbon. The results show a linear correlation between heavy metal content and particle size....

متن کامل

Effect of Particle Size Distribution and Chemical Composition on Properties of Magnesia Chromite Bricks

The present study was undertaken to improve the quality and increase the life time of magnesia-chromite refractory bricks used in the copper and lead industries. The results show that a decrease in the amount of large chromite particles in the formulation improves the thermomechanical properties and also reduces the slag penetration in the bricks. In addition it was also observed that the use o...

متن کامل

Effects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas

In this research, a mineral barite powder was reduced by carbon monoxide gas and the effects of reduction time and temperature was investigated as well as barite particle size. Results showed that the best result would be feasible when the barite particle sizes are between (-70 +100) in mesh scale. The barite reduction could reach the maximum level (98%) after reduction by carbon monoxide at 85...

متن کامل

Effects of Alfalfa Particle Size on Ensalivation Rate, Chewing Efficiency, and Functional Specific Gravity of Particulate Matter in Hereford Steers

Six ruminally fistulated Hereford steers (body weight=414±13 kg) were used in a switch back design to determine whether two particle sizes of alfalfa hay (18.75 and 4.65 mm theoretical cut length) influenced salivary secretion during eating. The experiment carried out in two 26-d periods, with 11-d of adaptation to ration, followed by 5 d for determining the level of voluntary feed intake, 7-d ...

متن کامل

Application of Particle Size Distribution Engineering and Nano-technology to Cement Recipes for some Iranian Offshore Oilfields

The design of cement slurry for horizontal wellbores is challenging as it must present very high quality cement slurry properties e.g. zero free water, less than 50 cc API fluid loss value, appropriate rheology and yield point for effective displacement, adequate compressive strength, which is critical for lightweight slurries, and finally stable cement column behind casing. The main objective ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 1  شماره 2

صفحات  83- 98

تاریخ انتشار 2011-09

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

کلمات کلیدی برای این مقاله ارائه نشده است

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023