Conical Conformal Antenna Design using the CPM Method for MIMO Systems
نویسندگان
چکیده مقاله:
Abstract- In this article, the design of conformal antennas has been discussed using the characteristic modes (CM) method. For this purpose, the vector wave function(VWF) has been utilized to achieve a two-dimensional mapping of the conformal antenna. In designing and analyzing of cone-shaped antennas applicable for multi-input multi-output (MIMO) systems, the most important goal is to achieve a structure with the least correlation coefficient. In order to achieve this goal in these types of antennas, first an appropriate two-dimensional mapping has been selected using the vector wave functions and then its orthogonal characteristic modes have been obtained by the CPM method. In this way, a 4-port conical antenna, whose analysis had many computational problems, was designed; the results obtained from the simulation and the prototype as well as the measurement of this antenna also confirmed the low correlation coefficient (< 0.001), the gain of about 4.2 dB in a frequency of 5.5 GHz, and SWR < 1.22 in the frequency range of 4.6 to 6.6 GHz, indicating a broad bandwidth of around 32%.
منابع مشابه
Antenna Design for Mobile MIMO Systems
While significant work has been dedicated to analyzing the performance of antennas for multiple-input multiple-output (MIMO) and diversity systems, little has appeared on synthesizing optimal antennas for these systems. This paper explores optimal antenna characteristics given understanding about the average structure of the propagation environment, making the results applicable for time-varyin...
متن کاملchannel estimation for mimo-ofdm systems
تخمین دقیق مشخصات کانال در سیستم های مخابراتی یک امر مهم محسوب می گردد. این امر به ویژه در کانال های بیسیم با خاصیت فرکانس گزینی و زمان گزینی شدید، چالش بزرگی است. مقالات متعدد پر از روش های مبتکرانه ای برای طراحی و آنالیز الگوریتم های تخمین کانال است که بیشتر آنها از روش های خاصی استفاده می کنند که یا دارای عملکرد خوب با پیچیدگی محاسباتی بالا هستند و یا با عملکرد نه چندان خوب پیچیدگی پایینی...
Antenna Design and Channel Characterization for Mobile MIMO Systems
One significant difficulty associated with the implementation of multiple-input multiple-output (MIMO) technology is that communication node mobility leads to a time-varying channel which can limit the achievable system throughput [1]. This paper quantifies the degradation in channel capacity resulting from channel temporal variation using novel information theoretic metrics, and demonstrates t...
متن کاملAntenna designs for MIMO systems
This chapter describes the development and testing of antenna elements for use in a Multiple-input-multiple-output (MIMO) application. MIMO wireless systems have antenna arrays at both the transmitter and receiver terminals. This project focuses on the terminal MIMO antenna array design. The requirements of the antenna element at the terminal are as yet not well-defined but will include (for co...
متن کاملCompact MIMO antenna design
This paper provides experimental and implementation details for various forms of multiple-input multiple-output (MIMO) cube antennas. Slot dipole antennas are used as basic elements of these MIMO antennas. Experimental results show that especially at higher frequencies of various wireless applications the additional loss of the printed antennas increase and therefore implementation of such ante...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 8 شماره 1
صفحات 57- 70
تاریخ انتشار 2019-06-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023