Compressive Behavior of a Glass/Epoxy Composite Laminates with Single Delamination

Vibration Monitoring of Composite Laminates with Delamination Damage

Comprehensively simulating the mixed-mode progressive delamination in composite laminates

Gao, Zhenyuan MSAA, Purdue University, May 2015. Comprehensively Simulating the Mixed-Mode Progressive Delamination in Composite Laminates. Major Professor: Wenbin Yu. Delamination, or interlaminar debonding, is a commonly observed failure mechanism in composite laminates. It is of great significance to comprehensively simulate the mixed-mode progressive delamination in composite structures bec...

Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique

In the present research, the effects of delamination size and location on vibration characteristics of laminated composite beams are investigated both analytically and numerically. In the analytical method, the delaminated beam is modeled as four interconnected Euler–Bernoulli beams and the constrained and free mode models are both simulated. The differential stretching and the bending-extensio...

Buckling Analysis of Rectangular Laminated Composite Plates With An Edge Delamination Under Compressive Load

The buckling analysis of rectangular laminated composite plates with an edge delamination under in-plane compressive loading is performed using the finite element method. Such a plate may be considered as a simplified model of stiffener plates of a stiffened panel. The buckling load and buckling mode are obtained by solving an eigenproblem. In an unconstrained analysis, physically inadmissible ...

Thermal Effects on the Compressive Behavior of Im7/peti5 Laminates

The effect of changing operating temperature on the compressive response of IM7/PETI5 composite laminates is investigated within this paper. The three temperatures evaluated for this study were –129C, 21C, and 177C, a spectrum from cryogenic to an elevated operating temperature. Laminate compressive strength property testing was conducted using the Wyoming Combined Load Compression fixture to g...

Wave Propagation Analysis in Composite Laminates Containing a Delamination Using a Three-Dimensional Spectral Element Method

A three-dimensional spectral element method SEM was developed for analysis of Lamb wave propagation in composite laminates containing a delamination. SEM is more efficient in simulating wave propagation in structures than conventional finite element method FEM because of its unique diagonal form of the mass matrix. Three types of composite laminates, namely, unidirectional-ply laminates, cross-...