Comparison of Tribological Behavior of Deep Cryogenic Treated Hot Work Tool Steel at Room and High Temperature

نویسندگان

  • I. Ebrahimzadeh Faculty of Materials Engineering Najafabad branch, Islamic Azad University
  • k. Amini Department of Mechanical Engineering, Tiran Branch, Islamic Azad University, Isfahan, Iran
  • Z. Ghorbani Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University
چکیده مقاله:

The deep cryogenic treatment is a complementary operation that is done on a variety of tool steels aimed at improving their abrasion resistance and hardness. In the case of the H13 hot-work steel, which is widely used at high temperatures as a hot-deformation tool, we need to determine the efficiency of subzero treatment on it at the working temperature. In this regard, this paper is focused on effect of deep cryogenic treatment on the wear behavior of H13 hot-work steel at the working temperature. We compared two types of quench-tempered and quenched-subzero-tempered samples in this study. The microstructure of the samples was determined by scanning electron microscopy and their structure was determined by X-ray diffraction device after the cryogenic treatment. The wear test was performed at work temperature of 600 °C (die temperature in the iron-based alloys forging process). The results indicated that the highest hardness rate has occurred in the quenched-subzero-tempered conditions, which amount is about 26% higher than that of the quenched-tempered in the oil. Applying quenched-subzero-tempered operations has reduced the percentage of residual austenite by 10%. Also, the fine, dispersed, and uniform sediments in this sample are more observed than the quenched-tempered samples. The improved weight lose were respectively achieved by 50% and 44% at temperatures of 25 and 600 °C. The evaluation of the wear surfaces indicates that the abrasion dominant mechanism is close-fitting and tribochemical.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigating the Effect of the Deep Cryogenic Heat Treatment on the Mechanical Properties and Corrosion Behavior of 1.2080 Tool Steel

Deep cryogenic heat treatment is assumed as a supplementary heat treatment performed on steels before the final tempering treatment to enhance the wear resistance and hardness of the steels. In this study, the effects of the deep cryogenic heat treatment on the wear behavior and corrosion resistance of the 1.2080 tool steel were studied using the wear testing machine and polarization and impeda...

متن کامل

assessment of deep word knowledge in elementary and advanced iranian efl learners: a comparison of selective and productive wat tasks

testing plays a vital role in any language teaching program. it allows teachers and stakeholders, including program administrators, parents, admissions officers and prospective employers to be assured that the learners are progressing according to an accepted standard (douglas, 2010). the problems currently facing language testers have both practical and theoretical implications but the first i...

The effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel

Cryogenic treatment can be used as a supplemental treatment that is performed on some tool steels between quenching and tempering as an effective method for decreasing retained austenite and increasing wear resistance. In this research, the effect of deep cryogenic treatment (DCT) on dimensional stability and mechanical properties of 80CrMo12 5 tool steel was investigated. The martensitic trans...

متن کامل

The Effect of Welding Parameters on the Room and High Temperature Tribological Behavior of the Weld Overlaid Die

As an important problem in forging factories, dies are destroyed because of high wear rate, plastic deformation and thermal and mechanical fatigue at high temperatures. This paper is an investigation into        the use of nickel super alloy with different welding parameters. Three weld overlaid alloys of inconel625, as wear resistance hardfacing materials on H13 tool steel, with different weld...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 16  شماره 1

صفحات  33- 41

تاریخ انتشار 2019-07-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023