Comparing Two Electrospinning Methods in Producing Polyacrylonitrile Nanofibrous Tubular Structures with Enhanced Properties

نویسندگان

  • Farzad Dabirian Department of Textile Engineering, College of Engineering, Razi University, Kermanshah, I.R. IRAN
  • Laleh Rajabi Polymer Research Lab., Faculty of Petroleum and Chemical Engineering, Razi University, Kermanshah, I.R. IRAN
  • Saleh Habeeb Polymer Research Lab., Faculty of Petroleum and Chemical Engineering, Razi University, Kermanshah, I.R. IRAN
چکیده مقاله:

Polyacrylonitrile nanofibrous tubular structures were produced through typical and opposite charge electrospinning methods and the effect of the method as well as the two key electrospinning parameters, namely concentration of the electrospinning polymer solution and rotational speed of mandrel collector on properties of such tubular structures were studied. The smples were characterized by X-ray diffraction, scanning electron microscopy, Fast Fourier Transform method and tensile tests. Increasing polymer solution concentration considerably increased the diameter of the nanofibers and decreased the bead formation, where the increasing ranges of the average diameters were larger and sizes of beads were smaller for the nanofibers produced by the opposite charge set-up. Nanofibers' diameter, on the other hand, decreased as the speed of the rotational mandrel increased and the observed decline was greater in the opposite charge method, especially at higher concentrations of polymer solution. An inversion point for the anisotropy of mechanical properties was found to be around 2164 rpm. The aspect ratio of the nanofibers also increased with increasing the take-up speed. Increasing the take-up speed increased the mechanical force of pulling the jet, resulting nanofibers with smaller diameter, which in turn improved the crystallinity and molecular orientation of the fibers that explained the enhanced tensile properties for smaller diameter fibers. Different breaking mechanisms for the randomly oriented fibers and directionally aligned nanofibers were observed.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

specialized methods to teach spelling: comparing three methods

چکیده: بررسی ادبیات مربوطه در کشور در زمینه یادگیری زبان انگلیسی نشان می‎دهد که علی‎رغم اهمیت املا در فرآیند یادگیری به طور عام و یادگیری زبان انگلیسی به طور خاص، این مولفه از جایگاهی متناسب با اهمیت آن برخوردار نیست و عمدتاً نادیده گرفته شده است. تحقیقات گسترده‎ای در خارج از کشور در مورد ماهیت این مولفه صورت گرفته است، در حالی که به جرأت می‎توان گفت در داخل کشور گامی در مورد درک ماهیت آن و فرآی...

15 صفحه اول

Effect of electrospinning parameters on morphological properties of PVDF nanofibrous scaffolds

Smart materials like piezoelectric polymers represent a new class of promising scaffold in neural tissue engineering. In the current study, the fabrication processing parameters of polyvinylidine fluoride (PVDF) nanofibrous scaffold are found as a potential scaffold with nanoscale morphology and microscale alignment. Electrospinning technique with the ability to mimic the structure and function...

متن کامل

Drawing dependent structures, mechanical properties and cyclization behaviors of polyacrylonitrile and polyacrylonitrile/carbon nanotube composite fibers prepared by plasticized spinning.

Drawing to change the structural properties and cyclization behaviors of the polyacrylonitrile (PAN) chains in crystalline and amorphous regions is carried out on PAN and PAN/carbon nanotube (CNT) composite fibers. Various characterization methods including Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction and thermal gravimetric analysis are used to ...

متن کامل

Design and fabrication of a nanofibrous polycaprolactone tubular nerve guide for peripheral nerve tissue engineering using a two-pole electrospinning system.

Nerve guidance conduits are considered to be the new generation of scaffolds designed for nerve disorders. A tubular construct with a highly aligned fibrous structure, mimicking the endoneurium layer surrounding inner axons of a nerve fascicle, is a suitable candidate for a nerve guide. In this paper a new approach for the fabrication of 3D tubular nerve guides is introduced using simulation of...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 38  شماره 3

صفحات  23- 42

تاریخ انتشار 2019-06-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023