Bayes Networks and Fault Tree Analysis Application in Reliability Estimation (Case Study: Automatic Water Sprinkler System)
نویسندگان
چکیده مقاله:
In this study, the application of Bayes networks and fault tree analysis in reliability estimation have been investigated. Fault tree analysis is one of the most widely used methods for estimating reliability. In recent years, a method called "Bayes Network" has been used, which is a dynamic method, and information about the probable failure of the system components will be updated according to the components data. In other words, the Bayes network is generally distributed with primary values and relations between variables. In this research, the reliability of the automatic Environmental detection and fire extinguisher system by water sprinkler system has been estimated by FTA and BAYES NETWORKS, also their comparison has been investigated. The probabilistic calculation and the graphical drawing required for this research has been completed by MATLAB and MICROSOFT BAYES NETWORK software. Finally, the reliability of an automatic water sprinkler system was calculated 0.93 by FTA. By updating the probability of failure and success, this value was changed to 0.89. The reason for the difference can be interpreted by taking into account the third state of the system, i.e., functioning with lower efficiency. The lowest level of reliability relates to a diesel generator that acts as a standby member in the event of a power failure. At the end, suggestions for improving the reliability of the automatic fire sprinkler system provided.
منابع مشابه
An Application of the Fault Tree Analysis for the Power System Reliability Estimation
The power system is a complex system with its main function to produce, transfer and provide consumers with electrical energy. Combinations of failures of components in the system can result in a failure of power delivery to certain load points and in some cases in a full blackout of power system. The power system reliability directly affects safe and reliable operation of nuclear power plants ...
متن کاملNuFTA: A CASE Tool for Automatic Software Fault Tree Analysis
Software fault tree analysis (SFTA) [1] is widely used for analyzing software requiring high-reliability. In SFTA, experts predict failures of system through HAZOP (Hazard and Operability study) or FMEA (Failure Mode and Effects Analysis) and draw software fault trees about the failures. Quality and cost of the software fault tree, therefore, depend on knowledge and experience of the experts. T...
متن کاملassessing political stability and instability in central asia and caucasus; case study, azerbaijan and kyrgyzstan
منطقه ی آسیای مرکزی وقفقاز به عنوان منطقه ای تاریخی و به دلیل دارا بودن ذخایر عظیم هیدرو کربنی از اهمیت ویژه ای برخوردار است. کشورهای این منطقه از عوامل عمده ی بی ثباتی نظیر عوامل جغرافیایی، اقتصادی، امنیتی، اجتماعی و سیاسی رنج می برند. پس از فروپاشی اتحاد جماهیر شوروی کشورهای منطقه از نعمت استقلال ناخواسته ای برخوردار شدند که مشکلات فوق را برای آن ها چندین برابر می کرد. در این روند برخی از این...
15 صفحه اولExperience from Application of Semi-Automatic Fault Tree Synthesis to Reliability and Availability Analysis of Ship Systems
The increasing complexity and scale of ship machinery systems pose significant challenges to failure analysis. There is a tendency to optimize systems via the introduction of new technologies in order to achieve, for example, improved energy efficiency or expand the operation area to extreme environments. Although such improvements are welcome, they typically also cause significant design chang...
متن کاملfault location in power distribution networks using matching algorithm
چکیده رساله/پایان نامه : تاکنون روشهای متعددی در ارتباط با مکان یابی خطا در شبکه انتقال ارائه شده است. استفاده مستقیم از این روشها در شبکه توزیع به دلایلی همچون وجود انشعابهای متعدد، غیر یکنواختی فیدرها (خطوط کابلی، خطوط هوایی، سطح مقطع متفاوت انشعاب ها و تنه اصلی فیدر)، نامتعادلی (عدم جابجا شدگی خطوط، بارهای تکفاز و سه فاز)، ثابت نبودن بار و اندازه گیری مقادیر ولتاژ و جریان فقط در ابتدای...
Empirical Bayes Estimation of Reliability
Assessment of the reliability of various types of equipment relies on statistical inference about characteristics of reliability such as reliability function, mean lifetime of the devices, or failure rate. General techniques of statistical inference (estimation and hypotheses testing) are reviewed in Estimation; Least-Squares Estimation; Maximum Likelihood; Nonparametric Tests; Hypothesis Testi...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 2 شماره 4
صفحات 325- 341
تاریخ انتشار 2018-11-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023