Assessment of aging effects on porcelain repair systems discoloration

نویسندگان

  • Abdolhamid Alhavaz ,Dental Materials Research Center, Department of Prosthodontics, Faculty of Dentistry, Babol University of Medical Sciences, Babol-Iran.
  • Amir Rastar ,Department of Textile Engineering, Faculty of Engineering, Islamic Azad University, Qaemshahr Branch, Qaemshahr-Iran.
  • Arash Poorsattar- Bejehmir ,Dentistry Student Research Committee, Dental Materials Research Center, Babol University of Medical Sciences, Babol-Iran.
  • Homayoun Alaghemand ,Dental Materials Research Center, Department of Operative Dentistry, Faculty of Dentistry, Babol University of Medical Sciences, Babol-Iran.
  • Mashhad Odak ,none
  • Yashar Vakili ,Dentistry Student Research Committee, Dental Materials Research Center, Babol University of Medical Sciences, Babol-Iran.
چکیده مقاله:

Introduction: The selection of porcelain is based on high biocompatibility, endurance, superficial texture and aesthetics. Nevertheless, the innate fracture charateritics of porcelain is the main cause of the intra oral fractures. Electing a suitable porcelain restorative system in terms of stability of color is important. For this reason, this study aimed to examine the color changes of common porcelain repair materials . Methods: Using a silicon mold, 30 pieces of feldspathic porcelain in A3 color, 10mm of diameter and 2 mm of thickness were prepared. The samples were randomly distributed into three groups : Group 1: Porcelain-Silane-Bonding-Composite Group 2: Porcelain-Silane-Bonding-Panavia F 2.0-Bonding-Silane-Porcelain Group 3: Porcelain-Silane-Bonding-Choice 2 -Bonding-Silane-Porcelain The aging process was accomplished with thermocyling (3000 cycles, 5/55 degree), incubation in 37&deg; and 100&deg; humidity. Thereafter, discoloration was assessed In CIE system via designation of color transforming matrix in MATLAB environment . Results: The average quantitative amount of discoloration at day 0, 90 and 180 were 76.8&plusmn;0.57, 79.15&plusmn;0.52, 80.13&plusmn;0.6 for Choice, 78.03&plusmn;0.9, 79.42&plusmn;0.82, 80.17&plusmn;0.51 for Panavia, and 78.41&plusmn;1.53, 79.59&plusmn;0.77, 81.03&plusmn;0.63 for Composite, respectively. The color changes by the time were significant for the all three groups (p<001).Calculating day 0-180 color changes, mean color differences for Choice, Panavia and Composite groups were 3.33&plusmn;0.83 , 2.13&plusmn;1.23, and 2.61&plusmn;1.6, respectively. The color changes did not differ in the studied groups (p<0.133). Conclusions: Post-aging color changes were significant, although all samples had color changes less than 3.5,Considering the clinical significance of color changes of more than 3.5, these results were acceptable and all three restorative materials could reliably be applied in the daily clinical use .

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Silane on Shear Bond Strength of Two Porcelain Repair Systems

Objectives: Ceramics have advantages such as optimal esthetics and biocompatibility. However, in the oral environment, they are subjected to high levels of stress due to masticatory forces, saliva, thermal changes and alterations of pH, which increase their risk of fracture. Since replacement of these restorations is costly and time-consuming, composite resin is often used for intraoral repair ...

متن کامل

Effect of Aging on Discoloration of Two Composite Surface Sealants

Objectives: Composite surface sealants were introduced aiming to prevent or decrease the discoloration and microleakage of composite restorations. This study sought to assess the effect of aging on discoloration of two composite surface sealants. Methods: In this experimental study, 24 samples were fabricated of Fortify Plus and BisCover LV composite surface sealants (10mm in diameter and 1mm ...

متن کامل

Effects of surface treatments and cement types on the bond strength of porcelain-to-porcelain repair.

PURPOSE The purpose of this in vitro study was to evaluate the effects of four surface treatments and two resin cements on the repair bond strength of a ceramic primer. MATERIALS AND METHODS Eighty-eight pairs of disks (10 and 5 mm in diameter, 3 mm thickness) were prepared from heat-pressed feldspar ceramics (GC Initial IQ). After being stored in mucin-artificial saliva for 2 weeks, the 10-m...

متن کامل

Laboratory evaluation of shear bond strength of porcelain repair methods

Introduction: Porcelain fracture is a relatively common problem in clinical dental practice. Various methods have been proposed for repairing porcelain fractures including direct composite resin repair or construction of a porcelain laminate veneer and its cementation with a resin cement. Evaluation of shear bond strength of porcelain repair methods was the purpose of this study. Methods: Tw...

متن کامل

The Effects of Porcelain Polishing Techniques on the Color and Surface Texture of Different Porcelain Systems

The aim of this study was to compare the effects of different porcelain polishing techniques on the color change and surface roughness of feldspathic porcelains and lithium disilicate glass-ceramic system. 80 porcelain specimens were divided into two subgroups, each subgroup was divided into 4 groups of 10 specimens. Surfaces were polished with different ceramic polishers. VITA Easyshade spectr...

متن کامل

effect of silane on shear bond strength of two porcelain repair systems

objective: ceramics have advantages such as optimal esthetics and biocompatibility. however, in the oral environment, they are subjected to high levels of stress due to masticatory forces, saliva, thermal changes and alterations of ph, which increase their risk of fracture. since replacement of these restorations is costly and time-consuming, composite resin is often used for intraoral repair o...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 2  شماره None

صفحات  46- 52

تاریخ انتشار 2013-03

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023