Application of ZnO/TiO2 Nanocomposite for the Improvement of Heat Transfer Coefficient in Tube Heat Exchangers

نویسندگان

  • M Yousefifar Faculty of Advanced Technologies, Nano-Chemical Eng. Dep., Shiraz University, Shiraz, Iran
  • S. Sabbaghi Faculty of Advanced Technologies, Nano-Chemical Eng. Dep., Shiraz University, Shiraz, Iran
چکیده مقاله:

The potential of nanofluids for the improvement of heat transfer coefficient in various heat exchangeequipment has been considered and studied as a major application during recent decades. In this research,heat transfer coefficient of ZnO, TiO2 and ZnO/TiO2 nanofluids in a shell and tube heat exchanger has beenstudied experimentally. ZnO nanoparticle was synthesized through precipitation technique. Sol-gel andmechanical techniques were employed to synthesize the ZnO/TiO2 nano-composite. Particle size analysis(PSA), XRD, FTIR and FE-SEM techniques were used to characterize ZnO/TiO2 nano-composite. Based onthe results, the nanofluid heat transfer coefficient was enhanced by increasing the nanofluid concentrationand temperature. The heat transfer coefficient of TiO2 was higher than that of ZnO nanofluid and the heattransfer coefficients of nano-composites were higher than that of ZnO and TiO2 nanofluids and the basefluid. Also, the heat transfer coefficient and the overall heat transfer coefficient were increased 3.79 to9.09 times and 4.27 to 9.14, respectively by increasing the nano-composite content.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigation of Heat Transfer Coefficient Enhancement for CuO/TiO2 Nanocomposite in a Tube Heat Exchanger

In order to improve the efficiency and rate of heat transfer in heat exchangers, various techniques such as increasing the heat transfer coefficient are proposed. This study is devoted to the investigation of heat transfer coefficient variations due to the addition of CuO, TiO2 and CuO/TiO2 nanoparticles into a shell and tube heat exchanger. CuO/TiO2 nanocomposite was synthesized using mechanic...

متن کامل

The effect of Geometrical parameters on heat transfer coefficient in helical double tube exchangers

Helical coil heat exchangers are widely used in industrial applications ranging fromcryogenic processes, air-conditioning, and nuclear reactors to waste heat recovery due totheir compact size and high heat transfer coefficient. In this kind of heat exchangers, flowand heat transfer are complicated. This paper reports a numerical investigation of theinfluence of different parameters such as coil...

متن کامل

Friction Loss and Heat Transfer Coefficient in Finned Tube Heat Exchangers for Reheating Massecuites

Equations developed for packed columns may be used to predict the overall heat transfer coefficient and friction loss in massecuite reheaters. The results seem to indicate that exchangers with the tubes staggered give higher heat transfer rates than those with the tubes in line.

متن کامل

the effect of geometrical parameters on heat transfer coefficient in helical double tube exchangers

helical coil heat exchangers are widely used in industrial applications ranging fromcryogenic processes, air-conditioning, and nuclear reactors to waste heat recovery due totheir compact size and high heat transfer coefficient. in this kind of heat exchangers, flowand heat transfer are complicated. this paper reports a numerical investigation of theinfluence of different parameters such as coil...

متن کامل

Measurement of Local Convective Heat Transfer Coefficient of Alumina-Water Nanofluids in a Double Tube Heat Exchanger

Heat transfer coefficient and thermal efficiency of γ-Al2O3/water nanofluids flowing through a double tube heat exchanger were experimentally investigated. The nanoparticles were well dispersed in distilled water at 0.05–0.15 %vol. A large number of experiments were performed at different fluid flow rates under turbulent flow regime (18,000<Re<40,000) and various nanofluid...

متن کامل

application of upfc based on svpwm for power quality improvement

در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...

15 صفحه اول

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 1

صفحات  33- 40

تاریخ انتشار 2019-02-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023