Anodic Oxidation of Methylene Blue Dye from Aqueous Solution Using SnO2 Electrode

نویسندگان

  • Ali Baddouh Laboratory of Materials & Environmental Science, Chemistry Department, Ibn Zohr University, Agadir, MOROCCO
  • Brahim El Ibrahimi Laboratory of Materials & Environmental Science, Chemistry Department, Ibn Zohr University, Agadir, MOROCCO
  • Lahcen Bazzi Laboratory of Materials & Environmental Science, Chemistry Department, Ibn Zohr University, Agadir, MOROCCO
  • Mohamed Errami Team Innovation and Development in Engineering Food, Laboratory for Sustainable Innovation and Applied Research (LIDRA), International University of Agadir, Universiapolis, Agadir, MOROCCO
  • Mohamed M. Rguiti Laboratory of Materials & Environmental Science, Chemistry Department, Ibn Zohr University, Agadir, MOROCCO
  • Mustapha Hilali Laboratory of Materials & Environmental Science, Chemistry Department, Ibn Zohr University, Agadir, MOROCCO
  • Sajjad Hussain Faculty of Materials and Chemical Engineering, GIK Institute of Engineering Sciences and Technology Topi, 23460, KPK, PAKISTAN
  • Volodymyr Tkach Chernivtsi National University, 58012, Kotsyubyns’ky Str, 2, Chernivtsi, UKRAINE
چکیده مقاله:

This study was performed to investigate the electrochemical oxidation of a solution containing methylene blue dye by using a tin oxide (SnO2) electrode. The effect of several operating factors such as electrolyte types, current density, initial dye concentration, and pH were investigated by following the discolorationand COD removal. The results show that the maximum color was removed by using chloride supporting electrolyte (i.e. KCl and NaCl) indicating that the indirect oxidation was promoted by the strong oxidant species (i.e. Cl2 and ClO–) generated at the anode surface. The best experimental conditions were attained for i = 60mA/cm2, 1% KCl and pH = 3, in which 100% of color was removed after 30 minutes and the COD removal reached 80.9% after 120 min. These results reveal that the anodic oxidation technique using SnO2 electrode could be used to remove the methylene blue dye from textile wastewater.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Removal of methylene blue dye aqueous solution using photocatalysis

The nano sized TiO2 and ZnO are the most active photocatalysts.  Methylene blue was used as a reference molecule for the photocatalytic degradation. The TiO2 and ZnO can totally remove methylene blue dye. The effect of various process parameters like initial concentration, contact time, dose of catalyst and pH on the extent of removal of dye by photocatalysis in presence o...

متن کامل

Removal of methylene blue dye aqueous solution using photocatalysis

The nano sized TiO2 and ZnO are the most active photocatalysts.  Methylene blue was used as a reference molecule for the photocatalytic degradation. The TiO2 and ZnO can totally remove methylene blue dye. The effect of various process parameters like initial concentration, contact time, dose of catalyst and pH on the extent of removal of dye by photocatalysis in presence o...

متن کامل

removal of methylene blue dye aqueous solution using photocatalysis

the nano sized tio2 and zno are the most active photocatalysts.  methylene blue was used as a reference molecule for the photocatalytic degradation. the tio2 and zno can totally remove methylene blue dye. the effect of various process parameters like initial concentration, contact time, dose of catalyst and ph on the extent of removal of dye by photocatalysis in presence of tio2 and zno was stu...

متن کامل

Potential Biosorbent Derived from Calligonum polygonoides for Removal of Methylene Blue Dye from Aqueous Solution

The ash of C. polygonoides (locally called balanza) was collected from Lakki Marwat, Khyber Pakhtunkhwa, Pakistan, and was utilized as biosorbent for methylene blue (MB) removal from aqueous solution. The ash was used as biosorbent without any physical or chemical treatment. The biosorbent was characterized by using various techniques such as Fourier transform infrared spectroscopy (FTIR), ther...

متن کامل

Decolorization of Methylene Blue from Aqueous Solution Using Ultrasonic / Fenton Like Process (RESEARCH NOTE)

Docolorization of Methylene Blue was investigating using a Ultrasonic/Fenton like reactor in batch mode. The effects of pH, reaction time, initial concentration of dye, H2O2 and Fe on the dye removal was studied. It was found that the increase of initial dye and H2O2 concentration and the increase of initial pH, are not beneficial for improving the dye removal efficiency. Increasing the dye con...

متن کامل

Catalytic Photodegradation and Mineralization of Cationic Dye Methylene Blue from Aqueous Solution onto Copper Doped Zeolite

In this study, the photodegradation and the mineralization of a cationic dye Methylene Blue (MB) from aqueous solution was investigated, in the presence of hydrogen peroxide, using a photocatalyst based on copper modified natural zeolite (Z-Cu). Comparative studies of photolysis, photocatalysis on the monocationic form of zeolite (Z-Na) and photocatalysis on Z-Cu, quantified in terms of process...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 38  شماره 5

صفحات  175- 184

تاریخ انتشار 2019-10-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023