An Upper Bound Solution for Analysis of Twist Extrusion Process with Elliptical Die Cross-section
نویسندگان
چکیده مقاله:
Twist extrusion process is a rather new route to produce highly strained materials. In this process, severe plastic deformation is applied by large shear strains. In current article, required energy for twist extrusion by use of admissible velocity field together with the upper bound technique is predicted. The proposed model is capable of considering the effect of various parameters such as die geometry and friction conditions. In addition, the model anticipates the critical die design parameters. To verify the proposed model, the predictions were compared with the results of a finite-element analysis and reasonable consistency was observed.
منابع مشابه
Comparative Analysis of Two Twist-Based SPD Processes: Elliptical Cross-Section Spiral Equal-Channel Extrusion vs. Twist Extrusion
The present paper deals with numerical comparison of two twist-based severe plastic deformation processes: (i) the elliptical cross-section spiral equal-channel extrusion (ECSEE) proposed recently as a novel process and (ii) the classical twist extrusion (TE). ECSEE was developed in attempt to process cylindrical work pieces and to generate more uniform strain distribution compared to classical...
متن کاملUpper Bound Analysis of Tube Extrusion Process Through Rotating Conical Dies with Large Mandrel Radius
In this paper, an upper bound approach is used to analyze the tube extrusion process through rotating conical dies with large mandrel radius. The material under deformation in the die and inside the container is divided to four deformation zones. A velocity field for each deformation zone is developed to evaluate the internal powers and the powers dissipated on all frictional and velocity disco...
متن کاملAn Upper Bound Analysis of Sandwich Sheet Rolling Process
In this research, flat rolling process of bonded sandwich sheets is investigated by the method of upper bound. A kinematically admissible velocity field is developed for a single layer sheet and is extended into the rolling of the symmetrical sandwich sheets. The internal, shear and frictional power terms are derived and they are used in the upper bound model. Through the analysis, the rolling ...
متن کاملAn Accurate Upper Bound Solution for Plane Strain Extrusion through a Wedge-Shaped Die
An upper bound method for the process of plane strain extrusion through a wedge-shaped die is derived. A technique for constructing a kinematically admissible velocity field satisfying the exact asymptotic singular behavior of real velocity fields in the vicinity of maximum friction surfaces (the friction stress at sliding is equal to the shear yield stress on such surfaces) is described. Two s...
متن کاملUpper bound and numerical analysis of cyclic expansion extrusion (CEE) process
Deformation of the material during cyclic expansion extrusion (CEE) is investigated using upper-bound theorem. The analytical approximation of forming loads agrees very well with the FEM results for different amounts of chamber diameter, friction factor and also for lower die angles. However, the difference between analytical and numerical solution increases at higher die angles which are expla...
متن کاملSimulation of a New Process Design to Fabricate a Rectangular Twist Waveguide Using Extrusion and a Twist Die
The aim of the present study is to determine the feasibility of making a rectangular twist waveguide used to rotate electromagnetic waves. For this purpose, the process of fabricating an aluminum rectangular twist waveguide was simulated by making use of finite element method and Deform software. The optimum length and angle of the twist die for manufacturing a twist waveguide with inner cross ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 2 شماره 2
صفحات 37- 46
تاریخ انتشار 2009-12-22
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023