An assessment on dispersion of carbon monoxide from acement factory

نویسندگان

  • Keishams, Fariba Department of Environmental Health, School of Health, Isfahan University of Medical Sciences, Isfahan, Iran
  • Abouee Mehrizi , Ehsan Department of Environmental Health Engineering, School of Public Health, North Khorasan University of Medical Sciences, Bojnurd, Iran
  • Goudarzi , Gholamreza Air Pollution and Respiratory Diseases Research Center, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran
  • Masihpour, Fereydoun Health Center of East, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran
  • Moradi, Mahsa Air Pollution and Respiratory Diseases Research Center, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran
  • Omidi Khaniabadi, Yusef Air Pollution and Respiratory Diseases Research Center, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran
  • Rashidi, Rajab Department of Occupational Health, Nutrition Health Research Center, School of Health, Lorestan University of Medical Sciences, Khorramabad, Iran
  • Sadeghi, Shahram Environmental Health Research Center, Kurdistan University of Medical Sciences, Sanandaj, Iran
  • Shegerd, Mojtaba Health Center of East, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran
  • Veysi Shikhrobat, Mohammad Health Center of East, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran
چکیده مقاله:

Background: Modeling the dispersion of pollutants from factory stacks addresses the problem of matching emissions of a cement plant with the capacity of the environment to avoid affecting the environment and society. The main objective of this study was to simulate the dispersion of carbon monoxide (CO) from the main stack of a cement plant in Doroud, Iran using SCREEN3 software developed by the US Environmental Protection Agency (US EPA). Methods: Four samplings were conducted to measure the concentration of CO in the three-stack flow of a cement factory. The input parameters were those affecting gas dispersion and included CO rate, meteorological parameters, factors associated with the stack, and various factors related to the receptor. All factors were incorporated in the model, and dispersion was modeled by SCREEN3. Results: Southwesterly winds have been dominant in the past 5 years. According to the results of this study, the highest and the lowest CO levels were estimated by the model in spring and autumn as having maximum amounts of 842.06 and 88.31 μg/m3, respectively, within distances of 526 and 960 m from the cement plant, respectively, at a downwind southwesterly direction from the plant. Conclusion: Although the maximum predicted CO levels in each of the four seasons were lower than the NAAQS criteria, the simulation results can be used as a base for reducing CO emissions to prevent the potentially significant health and environmental impacts imposed by long-term contact to such emissions.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling of carbon monoxide dispersion around the urban tunnel portals

The aim of this study is to investigate the problems caused by discharge of polluted air from tunnels into the environment with a specific focus on residential areas. In city tunnels, portal or stacks, pollutant management is a big challenge. Nowadays, air quality management, particularly in urban tunnels, is considered as a part of the ventilation system design. The goal is to see the environm...

متن کامل

QT dispersion in carbon monoxide poisoning.

BACKGROUND Carbon monoxide (CO) poisoning are serious health problems, and effect of reducing the blood's oxygen carrying capacity. Deaths due to CO poisoning are mostly related to myocardial injury and central nervous system pathologies. AIM The objective of this study was to determine the relationship between carbon monoxide intoxication, QT dispersion, and cardiac markers. MATERIALS AND ...

متن کامل

Carbon monoxide poisoning increases Tpeak–Tend dispersion and QTc dispersion

OBJECTIVES Carbon monoxide (CO) poisoning leads to cardiac dysrhythmia. Increased heterogeneity in ventricular repolarisation on electrocardiogram (ECG) shows an increased risk of arrhythmia. A number of parameters are used to evaluate ventricular repolarisation heterogeneity on ECG. The aim of our study is to investigate the effect of acute CO poisoning on indirect parameters of ventricular re...

متن کامل

Carbon monoxide from SCIAMACHY

Vertical columns of CO have been retrieved from SCIAMACHY/ENVISAT short wave/near infrared (∼2.3 µm) nadir spectra using the Weighting Function Modified (WFM) DOAS retrieval algorithm. WFM-DOAS has been applied to a small spectral fitting window located in SCIAMACHY's channel 8 (∼2365 nm) covering four CO absorption lines. The 5 focus of this paper is to demonstrate that quantitative informatio...

متن کامل

Effects of Erythropoietin on Electrocardiogram Changes in Carbon Monoxide Poisoning: an Experimental Study in Rats

The aim of this study was to define the electrocardiogram (ECG) changes following the moderate to severe CO intoxication in rats, and also evaluating the effect of erythropoietin (EPO) on observed cardiac disturbances. The growing literature on erythropoietin effect on cardiac ischemia led us to question its effect on cardiotoxicity due to the carbon monoxide poisoning. Wistar rats were exposed...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 4  شماره None

صفحات  163- 168

تاریخ انتشار 2017-06

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

کلمات کلیدی برای این مقاله ارائه نشده است

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023