A Parametric Study for Vibration Analysis of Composite Cylindrical Shell Resting under Elastic Foundation: Analytical and Numerical Methods
نویسندگان
چکیده مقاله:
The aim of this study is to investigatethe effective parameters on vibrations of circular cylindrical shells with fixed rotary speed andresting elastic foundation by means of analytical and finite element numerical simulation. First, the governing equations are derived using the theory of Donnell, considering the centrifugal forces,Coriolis acceleration, and the initial annular tension. Then, the analytical solution for cylindrical shells isintroduced under simply supported conditions. Further, the effect of parameters such as therotational speed of the shell, its lay-up, fiber angle, and the stiffness of the elastic foundation on the values of natural frequency and the critical velocity of the shells are studied. The analytical solution results are in good compatibility with the results achieved from the finite element method.
منابع مشابه
Semi-analytical Approach for Free Vibration Analysis of Variable Cross-Section Beams Resting on Elastic Foundation and under Axial Force
in this paper, free vibration of an Euler-Bernoulli beam with variable cross-section resting on elastic foundation and under axial tensile force is considered. Beam’s constant height and exponentially varying width yields variable cross-section. The problem is handled for three different boundary conditions: clamped-clamped, simply supported-simply supported and clamp-free beams. First, the equ...
متن کاملNumerical free vibration analysis of higher-order shear deformable beams resting on two-parameter elastic foundation
Free vibration analysis of higher-order shear deformation beam resting on one- and two-parameter elasticfoundation is studied using differential transform method (DTM) as a part of a calculation procedure. First,the governing differential equations of beam are derived in a general form considering the shear-freeboundary conditions (zero shear stress conditions at the top and bottom of a beam). ...
متن کاملNonlinear Vibration Analysis of an Euler-Bernoulli Beam Resting on a Nonlinear Elastic Foundation under Compressive Axial Force
This paper studies the nonlinear vibration analysis of a simply supported Euler-Bernoulli beam resting on a nonlinear elastic foundation under compressive axial load using nonlinear normal modes concept in the case of three-to-one (3:1) internal resonance. The beam’s governing nonlinear PDE of motion and also its boundary conditions are derived and then solved using the method of Multiple Time ...
متن کاملnumerical free vibration analysis of higher-order shear deformable beams resting on two-parameter elastic foundation
free vibration analysis of higher-order shear deformation beam resting on one- and two-parameter elasticfoundation is studied using differential transform method (dtm) as a part of a calculation procedure. first,the governing differential equations of beam are derived in a general form considering the shear-freeboundary conditions (zero shear stress conditions at the top and bottom of a beam). ...
متن کاملNumerical Analysis of Delamination Buckling in Composite Cylindrical Shell under Uniform External Pressure: Cohesive Element Method
Nowadays, due to high ratio of strength to weight, composite cylindrical shells are extensively used in a great variety of different industrial applications and under different cases of loads. In this study, the buckling of composite cylindrical shells was examined under uniform external pressure. The buckling analysis of composite cylindrical shells was first done by using theoretical relation...
متن کاملBuckling and Free Vibration Analysis of Fiber Metal-laminated Plates Resting on Partial Elastic Foundation
This research presents, buckling and free vibration analysis of fiber metal-laminated (FML) plates on a total and partial elastic foundation using the generalized differential quadrature method (GDQM). The partial foundation consists of multi-section Winkler and Pasternak type elastic foundation. Taking into consideration the first-order shear deformation theory (FSDT), FML plate is modeled and...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 11 شماره 2
صفحات 13- 22
تاریخ انتشار 2017-12-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023