A Novel Method for Preparation of Alumina-Supported Rhenium-Cesium Catalyst, Re-Cs/-Al2O3

نویسندگان

  • Ali Reza Rezvani Department of Chemistry, University of Sistan and Baluchestan, P.O. Box 98135-674 Zahedan, I.R. IRAN
  • Ali Reza Salehi Rad Department of Chemistry, University of Sistan and Baluchestan, P.O. Box 98135-674 Zahedan, I.R. IRAN
  • Elahe Khozeymeh Department of Chemistry, K. N. Toosi University of Technology, Tehran 15418, I.R. IRAN
  • Hassan Hadadzadeh Department of Chemistry, Isfahan University of Technology, Isfahan 84156-83111, I.R. IRAN
چکیده مقاله:

Alumina-supported Cs3[Re(C2O4)3] precursor has been synthesized  for preparation of Re-Cs/g-Al2O3 catalyst. Cs3[Re(C2O4)3]  has been prepared from the reaction of ReCl3 with  H2C2O4.2H2O and CsCl in water. The complex has been characterized by elemental analysis and various spectroscopy techniques such as FT-IR, UV-Vis and 13C-NMR. The complex was supported on γ-Al2O3 by column chromatography. Cs3[Re(C2O4)3]/Al2O3 was calcined at 600 °C for 6 h. Characterization of both precursor and calcined catalyst were carried out using XRD, BET specific surface area and thermal analysis methods (TGA/DSC).  

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

a novel method for preparation of alumina-supported rhenium-cesium catalyst, re-cs/-al2o3

alumina-supported cs3[re(c2o4)3] precursor has been synthesized  for preparation of re-cs/g-al2o3 catalyst. cs3[re(c2o4)3]  has been prepared from the reaction of recl3 with  h2c2o4.2h2o and cscl in water. the complex has been characterized by elemental analysis and various spectroscopy techniques such as ft-ir, uv-vis and 13c-nmr. the complex was supported on γ-al2o3 by column chromatography. ...

متن کامل

Rhenium Nanochemistry for Catalyst Preparation

The review presents synthetic approaches to modern rhenium-based catalysts. Creation of an active center is considered as a process of obtaining a nanoparticle or a molecule, immobilized within a matrix of the substrate. Selective chemical routes to preparation of particles of rhenium alloys, rhenium oxides and the molecules of alkyltrioxorhenium, and their insertion into porous structure of ze...

متن کامل

A sol-gel based method for preparation of Ni/La-Al2O3 as a new catalyst for dechlorination of monochlorobenzene

In this study, two new Ni/La-Al2O3 catalysts were prepared by a sol-gel method, with different aluminium precursors (aluminium triisopropoxide and aluminium nitrate). The catalysts were characterized by scanning electron microscope (SEM), X-ray fluorescence (XRF), X-ray diffraction (XRD), BET specific surface area, and particle size analysis (PSA) techniques. The BET results showed that the par...

متن کامل

Preparation of a Novel Super Active Fischer-Tropsch Cobalt Catalyst Supported on Carbon Nanotubes

The potential of carbon nanotubes (CNT) supported cobalt catalysts for Fischer-Tropsch (FT) reaction is shown. Using the wet impregnation method cobalt on carbon nanotubes catalysts were prepared with cobalt loading varying from 15 to 45 wt. %. The catalysts are characterized by different methods including: BET physisorption, X-ray diffraction, hydrogen chemisorption, and temperature-progra...

متن کامل

Catalytic Reforming of n-Heptane on Platimum - Rhenium Supported on Gamma-Alumina

Catalyitic reforming is one of the refinery processes in catalyst conversion that results to anincreases in octane number of naphtan which leads to production of gasoline with higher octanenumber. Hydrocarbons with high octan number that are produced in reforming process are as;aromatics, paraffins, isomers and etc.Not only Aromatics are used as fuel for motors but they are also useful in petro...

متن کامل

preparation of a novel super active fischer-tropsch cobalt catalyst supported on carbon nanotubes

the potential of carbon nanotubes (cnt) supported cobalt catalysts for fischer-tropsch (ft) reaction is shown. using the wet impregnation method cobalt on carbon nanotubes catalysts were prepared with cobalt loading varying from 15 to 45 wt. %. the catalysts are characterized by different methods including: bet physisorption, x-ray diffraction, hydrogen chemisorption, and temperature-programmed...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 27  شماره 3

صفحات  37- 43

تاریخ انتشار 2008-09-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023