A Multi-Physics Simulation Model Based on Finite Element Method for the Multi-Layer Switched Reluctance Motor
نویسندگان
چکیده مقاله:
Using ANSYS finite element (FE) package, a multi-physics simulation model based on finite element method (FEM) is introduced for the multi-layer switched reluctance motor (SRM) in the present paper. The simulation model is created totally in ANSYS parametric design language (APDL) as a parametric model usable for various conventional types of this motor and it is included electromagnetic, thermal, and structural analyses. The static characteristic of flux-linkage with a phase, phase current waveform, instantaneous torque, and electromagnetic losses are predicted using the developed electromagnetic model. Carrying out 3D FE thermal analysis, the temperature rise due to the calculated core and copper losses is predicted in the developed thermal model. The transient, modal and harmonic analyses are done in the introduced structural model to determine the mode shapes, natural frequencies, displacement, and sound pressure level (SPL) in both time and frequency domains. In order to evaluate the developed simulation model, it is applied to a typical multi-layer SRM, and simulation results related to all the above-mentioned analyses are presented.
منابع مشابه
A Novel Method of Phase Current Compensation for Switched Reluctance Motor System Based on Finite Element
Torque ripple is a major problem of switched reluctance motor drive system, which causes undesirable vibration and acoustic noise. In this paper, a novel method of torque closed-loop and fuzzy compensation control for the switched reluctance motor drive system based on finite element model is described. In terms of the simulation results and the special characteristics of static torquecurrent-a...
متن کاملElectromagnetic field analysis of novel low cogging force, linear switched reluctance motor, based on 2-D finite element method
This paper deals with electromagnetic design and 2-D (two-dimensional) magnetic field analysis of novel low force ripple linear switched reluctance (LSR) motor. The configuration that has been presented here has a higher number of rotor poles than stator poles, and the purpose of this configuration is to improve the force ripple, which is the weak point of LSRMs. In order to illustrate the ...
متن کاملA New Switched Reluctance Motor Design to Reduce Torque Ripple using Finite Element Fuzzy Optimization
This paper presents a new design to reduce torque ripple in Switched Reluctance Motors (SRM). Although SRM possesses many advantages in terms of motor structure, it suffers from large torque ripple that causes problems such as vibration and acoustic noise. The paper describes new rotor and stator pole shapes with a non-uniform air gap profile to reduce torque ripple while retaining its average ...
متن کاملGeometry Design of Switched Reluctance Motor to Reduce the Torque Ripple by Finite Element Method and Sensitive Analysis.
متن کامل
A Generalized Finite Element Model for Complex Multi-layer Panels
AESTRACT. Multi-layer insulation systems are widely used in many industrial sectors (particularly in automotive and aeronautic industries). They have a complex dynamic behavior due to the use of different maferials like viscoelastic, powelastic and acoustic /ayers. The interface conditions between these materials play also a significant m/e in the global behavior. The paper concentrates on mode...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 16 شماره 4
صفحات 494- 504
تاریخ انتشار 2020-12
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023