A hybrid neural–genetic algorithm for predicting pure and impure CO2 minimum miscibility pressure

نویسندگان: ثبت نشده
چکیده مقاله:

"> Accurate prediction of the minimum miscibility pressure (MMP) in a gas injection process is crucial to optimizing the management of gas injection projects. Because the experimental determination of MMP is very expensive and time-consuming, searching for a fast and robust mathematical determination of CO2-oil MMP is usually requested. This paper presents a new model based on a hybrid neural-genetic algorithm for predicting pure and impure CO2-oil MMP. The CO2-oil MMP of a reservoir fluid was correlated with the reservoir temperature, the composition of the oil, and that of the solution gas. The developed model is able to reflect the impacts on the CO2–oil MMP of the molecular weight of the C5+ fraction, reservoir temperature, and solution gas in the oil. The validity of this new model was successfully approved by comparing the model results to the calculated results for the common pure and impure CO2-oil MMP correlations. The new model yielded the accurate prediction of the experimental slim-tube CO2-oil MMP with the lowest mean absolute percentage error (MAPE), the standard deviation of error (SD), the root mean square error (RMSE), and the highest correlation coefficient among tested impure and pure CO2-oil MMP correlations. The results demonstrate that the hybrid neural-genetic model can be applied successfully and provide high accuracy and reliability for MMP forecasting.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of CO2 Concentration in Injecting Gas on Minimum Miscibility Pressure: Compositional Model and Experimental Study

For technical and economic success of miscible gas injection projects, an accurate laboratory measurement of Minimum Miscibility Pressure (MMP) at reservoir conditions is essential. On the other hand, compositional reservoir simulator is a useful tool in gas injection studies and prediction of MMP. The main goal of this paper is to describe a procedure to generate a three phase sequential t...

متن کامل

CARBON DIOXIDE MINIMUM MISCIBILITY PRESSURE ESTIMATION (CASE STUDY)

Carbon dioxide flooding is considered to be one of the most effective enhanced oil recovery methods for the light oil reservoirs. Depending on the operating pressure, the process might be miscible or immiscible. Minimum miscibility pressure (MMP) is the most important parameter for assessing the applicability of any miscible gas flood for an oil reservoir. The miscibility condition is determine...

متن کامل

effect of co2 concentration in injecting gas on minimum miscibility pressure: compositional model and experimental study

for technical and economic success of miscible gas injection projects, an accurate laboratory measurement of minimum miscibility pressure (mmp) at reservoir conditions is essential. on the other hand, compositional reservoir simulator is a useful tool in gas injection studies and prediction of mmp. the main goal of this paper is to describe a procedure to generate a three phase sequential type ...

متن کامل

Determination of Minimum Miscibility Pressure by Analytical Method

The analytical theory of one dimensional, dispersion free miscible displacement of oil by injection gas with nc component has shown that: the MMP is the lowest pressure at which any one of the initial oil, injection gas or crossover key tie lines becomes critical, which means that its length approaches to zero. In this paper, we propose a method for a solving multi component syst...

متن کامل

An Effective EOS Based Modeling Procedure for Minimum Miscibility Pressure in Miscible Gas Injection

The measurement of the minimum miscibility pressure (MMP) is one of the most important steps in the project design of miscible gas injection for which several experimental and modeling methods have been proposed. On the other hand, the standard procedure for compositional studies of miscible gas injection process is the regression of EOS to the conventional PVT tests. Moreover, this procedure d...

متن کامل

Determination of Minimum Miscibility Pressure in Gas Injection Process by Using ANN with Various Mixing Rules

Miscible gas injection is one of the most effective enhanced oil recovery techniques and minimum miscibility pressure (MMP) is an important parameter in miscible gas injection processes. The accurate determination of this parameter is critical for an adequate design of injection equipment investment prospect. The purpose of this paper is to develop a new universal artificial neural network (U-A...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 3  شماره 4

صفحات  44- 59

تاریخ انتشار 2006-10-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023