A Design Package for Single Tooth per Stator Pole Switched Reluctance Motors
نویسندگان
چکیده مقاله:
A design package is developed for a single-tooth per stator pole switched reluctance motor, 6/4. The rather simple assumed flux path method is used to estimate the unaligned permeance including the leakage permeances and the effects of shallow slot and tooth taper. The possibility of making rotor tooth width greater than stator tooth width is examined using the developed package. The result appeared to show that the consequent loss of static torque is minimal. This means that it might be possible to improve dynamic performance by incorporating this design feature.
منابع مشابه
A New Skewed-Rotor-Pole Switched Reluctance Motor Design
This paper considers a new switched reluctance motor (SRM) structure aiming at high starting torque with low volume. For some applications such as EVs (Electrical Vehicles), the motor volume and starting torque is a critical point in its design. In many methods, reducing the motor volume causes reduction in starting torque and decreases the motor efficiency. Unlike conventional SRMs, the rotor ...
متن کاملOptimal design of switched reluctance motors
The fundamental theory of the switched reluctance motor is presented with a number of new equations. It is used to show how the practical development of a design calculation should proceed, and this leads to a discussion of physical characteristics required to achieve satisfactory performance and to reduce acoustic noise. The paper makes a few generic observations on the characteristics of succ...
متن کاملEffects of Different Rotor and Stator Constructions on The Performance of Switched Reluctance Motors
This paper is carried out to develop a theoretical model for the simulation of 8/6-pole and 6/4-pole switched reluctance motors and describes the difference of these kinds of motors in dynamic characteristics such as magnetic field energy, magnetic field coenergy, magnitude of By, magnetization losses, steady-state weighted stress tensor torque, mutual inductance and so in performance. As known...
متن کاملA New Energy Optimizing Control Strategy for Switched Reluctance Motors
Abstruct-This paper describes a new and machine-indepenThe SRM is usually voltage controlled or current controlled. dent method to minimize the energy consumption of a speed controlled Switched Reluctance Motor (SRM). The control strategy is to vary the duty cycle of the applied dc voltage in order to obtain the desired speed quickly and when operating in steadystate vary the turn-on angle (ao,...
متن کاملA New Doubly Segmented Structure for Switched Reluctance Motors with High Torque Capability
In this paper, a new magnetic structure for switched reluctance motors is presented. In this structure, both stator and rotor has a segmented topology and there is no magnetic flux path between two stator/rotor segments or any possible combination of them. The proposed segmental structure may be considered with different number of phases as well as different number of segments per phase for any...
متن کاملComputer-optimised smooth-torque current waveforms for switched-reluctance motors
The paper discusses the design of current waveforms for switched-reluctance motors, which give rise to a constant (ripple-free) torque. The waveforms are optimised by computer search techniques, to give the lowest RMS current per phase consistent with producing smooth torque. Furthermore. the waveforms are constrained to be within the converter’s VA rating. Current waveforms and the associated ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 7 شماره 4
صفحات 197- 206
تاریخ انتشار 1994-11-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023