3D Scaffold Designing based on Conductive/Degradable Tetrapolymeric Nanofibers of PHEMA-co-PNIPAAm-co-PCL/PANI for Bone Tissue Engineering
نویسندگان
چکیده مقاله:
The hydrophilic, conducting, biocompatible and porous scaffolds were designed using poly(2-hydroxy ethyl methacrylate)-co-poly(N-isopropylacrylamide)-co-poly(ε-caprolactone) (P(HEMA-b-NIPAAm-b-CL))/polyaniline (PANI) for the osteoblast applications. To this end, the PHEMA and P(HEMA-b-NIPAAm) were synthesized via reversible addition of fragmentation chain transfer (RAFT) polymerization, and in next step, the ε-caprolactone was polymerized from –OH group of PHEMA segments through the ring opening polymerization (ROP). The electroactivity, mechanical properties, and hydrophilicity of designed scaffolds played an important role in the adhesion, differentiation, and proliferation of MG63 cells. By using the PHEMA and PNIPAAm, the hydrophilicity and biocompatibility, and by employing the PCL, the appropriate mechanical properties were acquired. The addition of PANI in the composition induced the conductivity to scaffolds. The morphology, electrical conductivity, biocompatibility, hydrophilicity and mechanical characteristics of the nanofibers were thoroughly investigated. The scaffolds possessed a porous nanostructure (nanofiber diameter ranged in 60–130 nm) with a large surface area, electrical conductivity of 0.03 S cm–1 and contact angle of 49 ± 5 ͦ , which imitated the natural microenvironment of extra cellular matrix (ECM) to regulate the cell attachment, proliferation and differentiation. In vitro cytocompatibility studies were performed over 168 h and indicated that the nanofibers were non-toxic to MG63 cells and potent to the artificial nanostructured osteoblasting.
منابع مشابه
poly (lactide-co-glycolide) nanofibers coated with collagen and nano-hydroxyapatite for bone tissue engineering
please cite this article as : tavakoli-darestani r, kazemian gh, emami m, kamrani-rad a. poly (lactide-co-glycolide) nanofibers coated with collagen and nano-hydroxyapatite for bone tissue engineering. novel biomed 2013;1:8-15. background: a combination of polymeric nanofibrous scaffold and bioactive materials is potentially useful in bone regeneration applications. materials and methods: in th...
متن کاملSuperabsorbent 3D Scaffold Based on Electrospun Nanofibers for Cartilage Tissue Engineering.
Electrospun nanofibers have been used for various biomedical applications. However, electrospinning commonly produces two-dimensional (2D) membranes, which limits the application of nanofibers for the 3D tissue engineering scaffold. In the present study, a porous 3D scaffold (3DS-1) based on electrospun gelatin/PLA nanofibers has been prepared for cartilage tissue regeneration. To further impro...
متن کامل3D conductive nanocomposite scaffold for bone tissue engineering
Bone healing can be significantly expedited by applying electrical stimuli in the injured region. Therefore, a three-dimensional (3D) ceramic conductive tissue engineering scaffold for large bone defects that can locally deliver the electrical stimuli is highly desired. In the present study, 3D conductive scaffolds were prepared by employing a biocompatible conductive polymer, ie, poly(3,4-ethy...
متن کاملGelatin Tight-Coated Poly(lactide-co-glycolide) Scaffold Incorporating rhBMP-2 for Bone Tissue Engineering
Surface coating is the simplest surface modification. However, bioactive molecules can not spread well on the commonly used polylactone-type skeletons; thus, the surface coatings of biomolecules are typically unstable due to the weak interaction between the polymer and the bioactive molecules. In this study, a special type of poly(lactide-co-glycolide) (PLGA)-based scaffold with a loosened skel...
متن کاملFabrication and characterization of nanofibrous tricuspid valve scaffold based on polyurethane for heart valve tissue engineering
Objective(s): Tissue engineering represents a new approach to solve the current complications of the heart valve replacements by offering viable valve prosthesis with growth and remodeling capability. In this project, electrospinning and dip coating techniques were used to fabricate heart valve constructs from medical grade polyurethane (PU). Methods: Fir...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 51 شماره 2
صفحات 101- 114
تاریخ انتشار 2018-12-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023