3D and 4D Seismic Data Integration in Static and Dynamic Reservoir Modeling: A Review

نویسنده

چکیده مقاله:

Reservoir modeling is the process of generating numerical representations of reservoir conditions and properties on the basis of geological, geophysical, and engineering data measured on the Earth’s surface or in depth at a limited number of borehole locations. Therefore, reservoir modeling requires an incorporation of the data from a variety of sources, along with an integration of knowledge and skills from various disciplines. In particular, recent advances in 3D and time-lapse 4D seismic data acquisition, processing, and quantitative interpretation have led to an increasing use of seismic data in the reservoir modeling processes. This paper provides an overview of static and dynamic reservoir modeling and outlines the key roles of 3D and time-lapse 4D seismic data in reservoir characterization and model building/updating processes. The review focuses on the methods, workflows, and challenges in the incorporation of 3D/4D seismic data into the static and dynamic reservoir model building/updating processes.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Financial Crisis and Steel Trade Integration in Asia and Pacific: A Static and Dynamic Analysis

The objective of this paper is to explore the effect of financial crisis on trade flows of steel industries in the major Asian-Pacific steel producing countries. Using a static and dynamic panel data analysis, we test the hypothesis that the global financial crisis has a negative effect on Asia-Pacific bilateral steel trade flows. We also examine the role of regional trade integration in bilate...

متن کامل

Simultaneous Integration of Pressure , Water Cut , 1 and 4 - D Seismic Data In Geostatistical Reservoir Modeling

A geostatistically-based inverse technique, the sequential-self calibration (SSC) method, is used to update reservoir models so that they match observed pressure, water cut and time-lapse water saturation derived from 4-D seismic. Within the SSC, a steady-state genetic algorithm (GA) is applied to search the optimal master point locations, as well as the associated optimal permeability perturba...

متن کامل

3D modeling of static and dynamic scenes

In this talk, I will describe the efforts at U.C. Berkeley’s video and image processing lab in the area of 3D model generation. The first half of the talk will focus on static 3D modeling and visualization of urban environments; our approach to this problem consists of generating airborne and ground based models separately and fusing them so as to arrive at a photo realistic 3D models suitable ...

متن کامل

Title : Mapping of Reservoir Properties and Facies Through Integration of Static and Dynamic Data

Knowledge of the distribution of permeability and porosity in a reservoir is necessary for the prediction of future oil production, estimation of the location of bypassed oil, and optimization of reservoir management. But while the volume of data that can potentially provide information on reservoir architecture and fluid distributions has increased enormously in the past decade, it is not yet ...

متن کامل

financial crisis and steel trade integration in asia and pacific: a static and dynamic analysis

the objective of this paper is to explore the effect of financial crisis on trade flows of steel industries in the major asian-pacific steel producing countries. using a static and dynamic panel data analysis, we test the hypothesis that the global financial crisis has a negative effect on asia-pacific bilateral steel trade flows. we also examine the role of regional trade integration in bilate...

متن کامل

A Review of Reservoir Rock Typing Methods in Carbonate Reservoirs: Relation between Geological, Seismic, and Reservoir Rock Types

Carbonate reservoirs rock typing plays a pivotal role in the construction of reservoir static models and volumetric calculations. The procedure for rock type determination starts with the determination of depositional and diagenetic rock types through petrographic studies of the thin sections prepared from core plugs and cuttings. In the second step of rock typing study, electrofacies are deter...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 8  شماره 2

صفحات  38- 56

تاریخ انتشار 2018-05-22

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023