بررسی میزان کاهندگی صدای وسایل حفاظت شنوایی برمبنای روش میکروفن داخل گوش MIRE در شرایط آزمایشگاهی

Introduction: Nominal noise reduction rate of the earmuff manufacturers can be different compared with the actual attenuation rate. The present study aimed to determine the actual noise reduction rate of common hearing protection devices using microphone in real ear method. Materials and Methods: In this study, five brands of common earmuffs used in Iranian industries were investigated on 30 subjects under laboratory conditions. Noise reduction rates of earmuffs were measured based on the ISO 11904 standard, microphone in real ear method, using noise dosimeter (SVANTEK, SV 102 model) equipped with a microphone SV 25 model. The earmuffs comfort was also assessed by the developed questionnaire. Results: The results showed that the real noise reduction rates of the earmuffs were between 49% to 86% of nominal reduction rates. Moreover, the actual insertion losses were much negligible at low noise frequencies. The performances of earmuffs based on manufacturers were not statistically different (Pv> 0.05). Based on subjects’ comfort scores, comfort of ear muffs were within the acceptable range. The noise reduction rates of the different earmuffs of each model were not statistically different as well (Pv > 0.05). Conclusions: Irregular use of earmuff can reduce the real attenuation of earmuff to lower than the minimum rate acquired in this study. Proper training and adequate supervision on proper use of earmuff can affect earmuff fitting along with increasing of real noise attenuation.