بررسی خواص مکانیکی و ضربه ویژه پیشرانه جامد مرکب بر پایه آمیزه HTPB/PEG و نرمکننده بوتیلننا
نویسندگان
چکیده مقاله:
A way to increase the specific impulse of solid propellants is using the energetic components as energetic binder or energetic plasticizer in the propellant formulations. Hydroxy terminated poly butadiene (HTPB) is the one of pre-polymer which was specifically synthesized for its use as a propellant. Incorporating of PEG into HTPB chains lead to increasing the polarity of binder and maybe prevent to the polar plasticizer migration. In this study, in the first step, elastomers of HTPB/PEG blend are prepared and their mechanical and thermal properties are investigated. Then, the propellants based-on HTPB/PEG blend are prepared and their mechanical properties are compared to the propellants based-on HTPB binder. Incorporating of PEG into binder, lead to increasing the stress and elongation of the propellant and also, influences its oxygen balance. In the solid propellant based-on 75% solid loading, theoretical and semi experience specific impulse was increased by the addition of BuNENA up to 7.9s and 6.9s.
منابع مشابه
اثر مقدار دیمریل دیایزوسیانات بر رفتاررئولوژیکی و خواص مکانیکی یک پیشرانه جامد مرکب بر پایه HTPB
Several parameters affecting the rheological and mechanical properties of solid composite propellants. Among them, the molar ratio of isocyanate (NCO) to hydroxyl (OH) groups (R value) is one of the important factors. In this research, the effects of changing in the weight ratio of dimeryl diisocyanate (DDI) curing agent related to hydroxyl terminated polybutadiene investigated on different pr...
متن کاملمطالعه پارامترهای موثر بر خواص مکانیکی پیشرانه جامد مرکب بر پایه HTPB/Al/AP
The success of the composite solid propellant motor depends on the proper stress-strain behavior of the propellant grain against tensile, compression and shear stresses and intensive changes in gravity during launch. In this paper, the effect of formulation components and other parameters affecting mechanical properties (tensile strength, elongation and elastic modulus), and their effects AP/Al...
متن کاملمروری بر روش های بهبود خواص مکانیکی پیشرانه های جامد مرکب بر پایه GAP (علمی-ترویجی)
GAP propellants has good performance due to high energy of this polymer. Unfortunately, due to poor flexibility of GAP polymer and presence of rigid and conjugated azide side groups in its structure, they have poor mechanical properties especially under low temperatures. This article deals with methods of improving mechanical properties of solid composite propellants based on GAP through changi...
متن کاملتأثیر جایگزینی بخشی ازAP با RDX برخواص مکانیکی، ایمنی و عملکردی پیشرانه های جامد مرکب بر پایه HTPB(علمی-ترویجی)
The partial replacement of RDX with AP attention of many researchers. In this paper, Firstly reasons of replacing part of AP with RDX expressed and the influence of replacing part of AP with RDX on the mechanical, safety and ballistic properties of composite solid propellant have been studied. Using of nitramines in the propellant formulations cause to change in the mechanical properties such ...
متن کاملبررسی تاثیر ریزساختار HTPB بر کهولت پیشرانه جامد مرکب با استفاده از آزمون دینامیکی مکانیکی
In this article aging behavior of composite solid propellant was investigated by determining its mechanical properties at elevated temperatures. For this purpose, three HTPB samples with different microstructures were selected and composite solid propellants were prepared based on them keeping similar other components and aging was studied by accelerated method. Mechanical properties were meas...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 14 شماره 3
صفحات 159- 165
تاریخ انتشار 2019-09
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی برای این مقاله ارائه نشده است
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023