بررسی تأثیر شکل هندسی، اندازه و خواص مکانیکی کلیپس بر میزان تنش های ایجاد شده در انگشت شست در حین مونتاژ
نویسندگان
چکیده مقاله:
Introduction: Nowadays, Snap-fits have many applications in the automotive industry, especially in assembly lines. They are used instead of the mechanical joints such as bolts, the cabling joints, and the car interior lining joints. Due to the special form of these fasteners, they are usually assembled manually. So, the form of clips’ contact area and the sharpness of the Snap-fits may cause the skin pains on the worker’s fingertips. This fact can cause an ergonomic study of these joints for reducing stress on workers and increasing their efficiency and health. Material and Method: The Finite Element Method (FEM), which is one of the most recognized methods in numeric calculation and computer simulations, is used in order to study the pressures applied to skin due to the pain receptors in the middle layer of skin, and mechanical tensions created in the workers’ thumbs during their work with clips. In order to do this, first a 3D model of a thumb, based on the CT scan data taken from a real thumb sample was created. To identify the different layers of skin, Boolean operations were used. Afterwards, the limit conditions were determined and finally different structures were made to analyze the size, geometric shape and mechanical properties of the clips. Result: In general, the results show that for those clips that their thumb touching surface is only round in edges, the most pressure on the middle layer of skin decreases as the radius of the round edge increases. Whereas such tensions, lightly increase as the radius increases in those clips that have a hybrid design (the combination of flat and curved surfaces). The result of the material analysis for clips shows that using elastic materials has only a limited effect on reducing tensions (only if rubber like materials are used) and for all tough materials, be it plastic or steel, the intensity of pressure tension would increase in the same manner on all the mentioned items. Conclusion: The results suggest that during assembly work there are different factors which affect the tension on the fingers, factors like geometric structure, material and mechanical properties. However, the magnitude of those items’ effects are not the same, and that data can be observed while making an ergonomic design for clips.
منابع مشابه
اثر بربرین در تنظیم آستروسیتهای Gfap+ ناحیه هیپوکمپ موشهای صحرایی دیابتی شده با استرپتوزوتوسین
Background: Diabetes mellitus increases the risk of central nervous system (CNS) disorders such as stroke, seizures, dementia, and cognitive impairment. Berberine, a natural isoquinolne alkaloid, is reported to exhibit beneficial effect in various neurodegenerative and neuropsychiatric disorders. Moreover astrocytes are proving critical for normal CNS function, and alterations in their activity...
متن کاملاثر بربرین در تنظیم آستروسیتهای Gfap+ ناحیه هیپوکمپ موشهای صحرایی دیابتی شده با استرپتوزوتوسین
Background: Diabetes mellitus increases the risk of central nervous system (CNS) disorders such as stroke, seizures, dementia, and cognitive impairment. Berberine, a natural isoquinolne alkaloid, is reported to exhibit beneficial effect in various neurodegenerative and neuropsychiatric disorders. Moreover astrocytes are proving critical for normal CNS function, and alterations in their activity...
متن کاملبررسی تاثیر ارتعاشات مکانیکی در حین انجماد بر خواص مکانیکی و ریزساختار آلیاژ آلومینیوم A380
The effect of low frequency mechanical vibration during solidification on the microstructure and mechanical properties of A380 aluminum alloy has been studied. The main purpose of this research is to do a systematic work to find the optimum vibrational frequency. Different frequencies in the range of 0-60Hz at a constant amplitude was applied to the unmodified A380 alloy. Mechanical properties,...
متن کاملتأثیر عملیات حرارتی بر ریزساختار و خواص مکانیکی پوشش Cr3C2-NiCr ایجاد شده توسط فرایند HVOF
ایجاد ترکیب سرمتی Cr3C2-NiCr توسط فرایند پاشش سوخت-اکسیژن سرعت بالا (HVOF) منجر به انحلال بخشی از فازهای Cr3C2 در آلیاژ NiCr و افت سختی و مدول الاستیک پوشش میشود. در این تحقیق، پودر Cr3C2-25wt% (Ni-20Cr) توسط فرایند HVOF روی زیرلایههایی از جنس سوپر آلیاژ Hastelloy X اعمال شدند. تأثیر عملیات حرارتی بر بازیابی فاز Cr3C2و بهبود سختی و مدول الاستیک پوشش مورد بررسی قرار گرفت. بدین منظور، بررسی ری...
متن کاملDegenerate Four Wave Mixing in Photonic Crystal Fibers
In this study, Four Wave Mixing (FWM) characteristics in photonic crystal fibers are investigated. The effect of channel spacing, phase mismatching, and fiber length on FWM efficiency have been studied. The variation of idler frequency which obtained by this technique with pumping and signal wavelengths has been discussed. The effect of fiber dispersion has been taken into account; we obtain th...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 7 شماره 2
صفحات 85- 96
تاریخ انتشار 2017-06
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی برای این مقاله ارائه نشده است
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023