هادی کارگر شریف آباد
استادیار، گروه مهندسی مکانیک، واحد سمنان، دانشگاه آزاد اسلامی ، سمنان، ایران
[ 1 ] - مدل سازی آب شیرین کن تقطیرچند مرحله ای با فشرده سازی بخار
با توجه به نیاز روز افزون انسان به آب آشامیدنی و وجود محدودیت در منابع قابل دسترس آب آشامیدنی، تصفیه آب با روشی مقرون به صرفه و بهینه از نظر اقتصادی و مصرف انرژی بسیار اهمیت دارد . در تمام فرآیند ها برای تصفیه آب وتهیه آب خالص باید انرژی صرف شود، از آنجا که منابع قابل دسترس انرژی نیز محدود می باشد محققان همیشه در تلاش برای شناسایی بهترین روش برای تصفیه آب از نظر هزینه مصرف انرژی هستند ، آنها هم...
[ 2 ] - New Achievements in Fe3O4 Nanofluid Fully Developed Forced Convection Heat Transfer under the Effect of a Magnetic Field: An Experimental Study
Fe3O4 nanofluid fully developed forced convection inside a copper tube is empirically investigated under the effect of a magnetic field. All of the investigations are performed under laminar flow regime (670≤Re≤1700) and thermal boundary conditions of the tube with uniform thermal flux. The tube is under the effect of a magnetic field in certain points. This research aims to study the effect of...
[ 3 ] - بررسی عددی انتقال حرارت جابه جایی اجباری فروسیال در لوله تحت میدان مغناطیسی
This research study presents a numerical study on forced convection heat transfer of an aqueous ferrofluid passing through a circular copper tube in the presence of an alternating magnetic field. The flow passes through the tube under a uniform heat flux and laminar flow conditions. The primary objective was to intensify the particle migration and disturbance of the boundary layer by utilizing ...
[ 4 ] - Presenting Three Design Methods for Axial Compressor Blade via Optimization
Improving the efficiency of compressors has been one of the most important goals of researchers over the years. In this paper, three different methods are presented for parameterization and blade optimization of axial flow compressor. All methods consist of flow analysis tool, optimization algorithms, and parametric geometry generation tool, that are different in each approach. Objective functi...
[ 5 ] - Hybrid nanofluid based on CuO nanoparticles and single-walled Carbon nanotubes: Optimization, thermal, and electrical properties
The purpose of this study is to use the thermal and electrical conductivities of copper oxide nanoparticles and carbon nanotubes for the preparation of high-performance nanofluids for achieving better heat transfer properties. These nanofluids consist of a water/Ethylene Glycol solution containing single-wall carbon nanotubes (SWCNTs) and copper oxide nanoparticles (CuONPs). The effects of such...
Co-Authors