سیدمحمدجواد رضوی
دانشگاه صنعتی مالک اشتر - مجتمع دانشگاهی مهندسی برق و الکترونیک
[ 1 ] - تحلیل اثرات صفحه زمین دایروی محدود در آنتنهای تکقطبی سیمی
در این مقاله اثر صفحه زمین محدود آنتن بر الگوی تشعشعی آن تحلیل و بررسی شده است. الگوی تشعشعی چند نمونه آنتن تکقطبی سیمی ساده و یک آنتن تکقطبی خطپیچدار تیغهایشکل -که با المانهای فشرده بارگذاری شده و پهنای باند 30-500 MHz را پوشش میدهد- با صفحه زمینهای محدود با روشهای تحلیلی تفرق هندسی (GTD) و جریان معادل لبه (EEC) محاسبه شدهاند. نتایج تحلیلی و شبیهسازیها نشان میدهد که روش GTD در حا...
[ 2 ] - Coupling Effects and Performance of Loran Transmitter Antennas
It is known that if a conductor resides in the neighboring of an antenna with a small distance relative to the wavelength, it induces a reverse current on the conductor. This paper involves the unavoidable coupling effects on some common types of LF antennas, due to the large wavelength in this frequency band. In particular, after some discussions about top-loaded antennas, the coupling effect ...
[ 3 ] - Radiation Pattern Analysis of Inverted-F Antenna Mounted on the Side Wall of a Long Cylinder
An analytical technique is proposed for estimation of the radiation pattern of inverted-F antenna (IFA) which is mounted on the side wall of a long cylinder. The method can be applied to describe the IFA radiation in a lot of practical cases. It is indicated that this radiation pattern is a combination of radiation patterns of a horizontal and a vertical small radiator, near the cylinder with a...
[ 4 ] - A New Circular Polarization Metamaterial Ferrite Phase Shifter
In this paper, a new X band Metamaterial (MTM) based ferrite phase shifter is presented. The phase shifter is excited by circular polarized wave base on combination of TE10 and TE01 modes in a square waveguide. In order to synthesize negative refractive index metamaterial (NIM), negative permeability of ferrite slabs in extraordinary mode is mixed with the negative permitivity of printed period...
[ 5 ] - Hybrid Model for Bulk Current Injection Probe
A new hybrid-model for BCI probe is derived . This model is built based on the probe's internal structure without refinements, and by carrying out just one electrical measurement for the reflection coefficient, so that it can be generalized and used in studying the effect of layout parameters in the aim of improving the probe high frequency performance, which helps the developer in design stage...