basant Sikarwar
Mechanical Engineering, Amity University Uttar Pradesh Noida India
[ 1 ] - Estimate the Performance of Catalytic Converter Using Turbulence Induce Devices
In this manuscript, the experimental setup was designed and fabricated for optimizing the parameters of a catalytic converter of INDICA V2 exhaust system. Three turbulence intensify devices, namely Swirl Venturi, Swirl Blades and Swirl Contour, were close-fitted before the catalytic converter. The heating element is embedded in its body and thermocouples are used for knowing the performance at ...
[ 2 ] - Towards an Analytical Model for Film Cooling Prediction using Integral Turbulent Boundary layer
The objective of this work is to develop deep theoretical methods that are based on the solution of the integral boundary layer equations for investigating film cooling in liquid rocket engine. The integral model assumes that heat is transferred from hot free stream gas to the liquid film both by convection and radiation. The mass is transferred to the free srteam gas by the well-known blowing ...
[ 3 ] - Experimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling
Heat transfer coefficient in nucleate pool boiling near critical heat flux at least one orderhigher than the convectional heat transfer modes. In this paper, an experimental setup isdesigned and fabricated to investigate the mechanism of heat transfer from boiling surface tobulk liquid near critical heat flux. The images of pool boiling near the high heat flux regionreveals that the individual ...
Co-Authors