فتحی, سید حمید
دانشگاه صنعتی امیر کبیر
[ 1 ] - یک روش جدید شناسایی نوسان توان برای استفاده در رله دیستانس با استفاده از داده های PMU
در این مقاله روشی جدید براساس استفاده از داده های PMU برای تشخیص نوسان توان و جلوگیری از عملکرد ناصحیح رله های دیستانس ارائه شده است. نوسان توان همیشه یکی از مسائل مهم در پایداری شبکه های قدرت بوده است. در سال های اخیر بدلیل بزرگتر شدن شبکه های قدرت و عملی شدن بازار برق، نوسان توان های بزرگی در شبکه های مختلف در سراسر جهان رخ داده است که باعث بروز خاموشی هایی بزرگ شده اند. با ورود تجهیزات جدید...
[ 2 ] - Novel Auxiliary Power Unit Configuration Based On Fuel Cell Technology for Civil Aircraft Application
This paper proposes novel Fuel Cell Auxiliary Power Unit (FCAPU) for J150+ aircraft application. The primary version of APU in J150+ aircraft is a gas turbine Auxiliary Power Unit (APU) which is based on gas turbine jet engine but in the suggested FCAPU, the generated electrical power is achieved from chemical energy with higher efficiency. The Solid Oxide Fuel Cell (SOFC) technology is used to...
[ 3 ] - Series Resonance Based Fault Current Limiter with Controlling The Point of Common Coupling Voltage
This paper proposes a novel Fault Current Limiter (FCL) for the application on distribution networks to control voltage sags at the Point of Common Coupling (PCC) during faults. This new FCL is based on series resonance including resonance transformer and series capacitor. So, by proper design of the series resonance LC tank, the fault current is limited to an acceptable level. The FCL operatio...
[ 4 ] - Efficient low-voltage ride-through nonlinear backstepping control strategy for PMSG-based wind turbine during the grid faults
This paper presents a new nonlinear backstepping controller for a direct-driven permanent magnet synchronous generator-based wind turbine, which is connected to the power system via back-to-back converters. The proposed controller deals with maximum power point tracking (MPPT) in normal condition and enhances the low-voltage ride-through (LVRT) capability in fault conditions. In this method, to...
[ 5 ] - Chopper-Based Real-Time Load Emulator with Feed-Forward and Hysteresis Current Controller
Nowadays, the usage of load emulators, is the best method for implementation and analysis of different electrical load change scenarios in laboratories. This paper presents an improved programmable load emulator which can emulate both reference active and reactive power simultaneously. The proposed control system can track the dynamic load changes rapidly and accurately in addition to pulse cha...
Co-Authors