Hadi Mansouri
Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran
[ 1 ] - The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process
Equal channel angular rolling (ECAR) process is one of the severe plastic deformation (SPD) methods that have been used to make ultra-fine grain (UFG) materials with improving the mechanical properties of samples. After performing the process at several paths, a large strain is applied to the material that can cause decreasing the grain size and improving the mechanical and physical properties ...
[ 2 ] - Microstructure evolution and mechanical properties of Mo40/C93200 bimetal processed by compound casting process
Compound casting refers to a process that used to produce bimetals. This study investigates the interface of Mo40/C93200 that is produced by compound casting process. In this research, molten bronze is poured around steel core, interaction between liquid and solid creates a diffusion zone and followed by a transition layer which leads to the creation of diffused region between the interfaces of...
[ 3 ] - Investigation of Springback Angle in Single Point Incremental Forming Process on Explosive Welded Cu/St/Cu Multilaye
Nowadays, the role of light weight materials has grown up in important industries such as aerospace and biomechanics, but before the appliance, their strength should be increased. A modern way to increase this factor along with the lightweight factoris using bimetal sheets, hence, the design of multilayer sheets has been very much considered recently. In this study, explosive welded Cu/St/Cu mu...
[ 4 ] - The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process
Equal channel angular rolling (ECAR) process is one of the severe plastic deformation (SPD) methods that have been used to make ultra-fine grain (UFG) materials with improving the mechanical properties of samples. After performing the process at several paths, a large strain is applied to the material that can cause decreasing the grain size and improving the mechanical and physical properties ...
[ 5 ] - Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets
In this study, constraint groove pressing (CGP) process and ultrasonic assisted CGP (UCGP) process were investigated on the process forces, mechanical properties of the sheet, including hardness and tensile tests and grain size. Pure copper sheets were used as samples in this research. Samples were tested both with and without ultrasonic vibrations for mechanical properties and grain size up to...
Co-Authors