F. Javidrad
[ 1 ] - Development of a Design Procedure for Aeronautical Structures Based on Reliability
In this paper, an approach to aeronautical structural design based on reliability analysis is presented. In this way, the concept of level of safety is discussed and methods of its calculation using statistical data are described. Based on the concept of level of safety, a design procedure is proposed. In order to validate this design procedure, two design cases are studied. In the first case s...
[ 2 ] - Damage Assessment using an Inverse Fracture Mechanics approach
This paper studies the application of an inverse methodology for problem solving in fracture mechanics using the finite element analysis. The method was applied to both detection of subsurface cracks and the study of propagating cracks. The procedure for detection of subsurface cracks uses a first order optimization analysis coupled with a penalty function to solve for the unknown geometric par...
[ 3 ] - A Cohesive Zone Model for Crack Growth Simulation in AISI 304 Steel
Stable ductile crack growth in 3 mm thick AISI 304 stainless steel specimens has been investigated experimentally and numerically. Multi-linear Isotropic Hardening method coupled with the Von-Mises yield criterion was adopted for modeling elasto-plastic behavior of the material. Mode-I CT fracture specimens have been tested to generate experimental load-displacement-crack growth data during sta...
[ 4 ] - بهینه‌سازی سختی ورق‌های مواد مرکب چندلایه با استفاده از روش شبیه‌سازی پخت فلز موازی
روش شبیه‌سازی پخت فلز یکی از روش‌های پرکاربرد در یافتن نقاط حداقل/حداکثر مطلق توابع برای متغیرهای پیوسته یا ناپیوسته است. این روش که بر مبنای جستجوی تصادفی بنیان گذاشته شده یکی از روش‌های مونت‌کارلو بوده که در آن امکان پرش تصادفی تابع از نقاط حداقل/حداکثر موضعی وجود دارد. در این مقاله، استفاده از روش شبیه‌سازی پخت فلز در طراحی ورق‌های چندلایه برای رسیدن به خواص سختی مؤثر مطلوب، مورد بررسی قرار ...
Co-Authors