Viscous Models Comparison in Water Impact of Twin 2D Falling Wedges Simulation by Different Numerical Solvers

Authors

Abstract:

In this paper, symmetric water entry of twin wedges is investigated for deadrise angle of 30 degree. Three numerical simulation of a symmetric impact, considering rigid body dynamic equations of motion in two-phase flow is presented. The two-phase flow around the wedges is solved by Finite Element based on Finite Volume method (FEM-FVM) which is used in conjunction with Volume of Fluid (VOF) scheme in ANSYS Fluent and ANSYS CFX and Phase Field scheme in COMSOL Multiphysics. The method and scheme of simulation are validated by experimental data for geometry with one wedge. The dynamic mesh, mesh motion and moving mesh models are used to simulate dynamic motion of the wedges in ANSYS Fluent, ANSYS CFX and COMSOL Multiphysics, respectively. The vertical velocity and pressure coefficient versus time are determined and comparisons of the computed mentioned parameters against experimental data are performed. The eight characteristics effects of fluid flow are investigated till 0.25 second after wedges falling including impact event. It is demonstrated that the ANSYS Fluent and k-ε were the best software and viscous model, respectively.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Numerical Models of Water Impact

This paper presents a numerical method for studying water impact of a two-dimensional body of arbitrary cross-section. The global simulation procedure based on the boundary element method is constructed. The attention is focused on the computational description of the jet flow in the framework of a potential flow assumption. The proposed computational model makes the numerical analysis more sta...

full text

Numerical Simulation of Mixing in Viscous - Fingering

Mixing of two fluids in viscously unstable displacements is far from being fully understood. It is not known how mixing efficiency depends on the viscosity contrast between the fluids, especially for adevction-dominated flows (Peclet number Pe > 103). It is well known that when a less viscous fluid displaces a more viscous fluid, the displacement front is unstable and leads to the formation of ...

full text

Comparison of Solvers for 2d Schrödinger Problems

This paper deals with the numerical solution of both linear and non-linear Schrödinger problems, which mathematically model many physical processes in a wide range of applications of interest. In particular, a comparison of different solvers and different approaches for these problems is developed throughout this work. Two finite difference schemes are analyzed: the classical Crank-Nicolson app...

full text

Comparison of three different numerical schemes for 2D steady incompressible lid-driven cavity flow

In this study, a numerical solution of 2D steady incompressible lid-driven cavity flow is presented. Three different numerical schemes were employed to make a comparison on the practicality of the methods. An alternating direction implicit scheme for the vorticity-stream function formulation, explicit and implicit schemes for the primitive variable formulation of governing Navier-Stokes equatio...

full text

Numerical Simulation of Impact of Low Velocity Projectiles With Water Surface

In this article, Finite Element Method (FEM) and Eulerian-Lagrangies Algorithm (ELA) formulation were used to numerically simulate the impact of several low-velocity projectiles with water surface. Material models which were used to express behavior of air and water included Null material model. For the projectiles, rigid material model were applied. Results were validated by analyzing the impa...

full text

Numerical Simulation of Water Entry of Different Arbitrary Bow Sections

Water impact phenomenon of general bow section is a critical event for planning hulls. In this paper, the water entry of several arbitrary bow sections is investigated. For this purpose, arbitrary bow shapes which are introduced by Lewis form approximation are considered. In order to obtain pressure distribution and free surface profile, volume of fluid (VOF) method coupled with finite volume m...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 9  issue None

pages  1- 13

publication date 2018-01

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023