Unsteady-State Modeling of the Fluidized Bed Polyethylene Reactor
Authors: not saved
Abstract:
This article doesn't have abstract
similar resources
Control of a Fluidized Bed Polyethylene Reactor
In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...
full textcontrol of a fluidized bed polyethylene reactor
in present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. a double active sites model for ziegler-natta catalysts is used for simulation of polymerization reaction. hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with differentiall...
full textFuzzy Modeling for an Anaerobic Tapered Fluidized Bed Reactor
Fuzzy modeling has great adaptability to the variations of system configuration and operation conditions. This paper investigates the fuzzy modeling of a laboratory scale system of anaerobic tapered fluidized bed reactor (ATFBR). The studied system is the anaerobic digestion of synthetic wastewater derived from the starch processing industries. The experiment was carried out in a mesophilic ATF...
full textTwo Phase Modeling of Char Combustion in a Circulating Fluidized Bed Reactor Using ASPEN PLUS
In this paper, combustion of char in the riser of circulating fluidized bed was modeled using ASPEN PLUS. Since physical and chemical phenomena are involved in the process, the model integrates the two-phase hydrodynamic sub-model with the reaction sub-model derived from the literature. In the proposed model, the fluidized bed is divided into several sections and the behavior of each section wa...
full textDecomposition of hydrogen peroxide in a catalytic fluidized-bed reactor
The decomposition of H2O2 by a novel supported g-FeOOH catalyst was performed in a continuous fluidized-bed reactor. This catalyst has been successfully used in the treatment of organic contaminants with H2O2 in our previous work. In this study, we attempted to determine the effects of pH, H2O2 concentration, and catalyst concentration on the decomposition of H2O2. An approach, we regarded this...
full textFluidization Characteristics of a Prototype Fluidized Bed Reactor
The fluidization characteristics of a prototype-fluidized bed laboratory reactor were understudied in order to investigate the suitable conditions at which the dehydrogenation reaction of butane could be carried out. To achieve this, a reactor with an effective volume of 1100ml was fabricated and coupled with temperature and pressure accessories. Zeolites were obtained from the market and clay ...
full textMy Resources
Journal title
volume 6 issue 1
pages 23- 39
publication date 2009-01-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023