Ultra-Fast All-Optical Half Subtractor Based on Photonic Crystal Ring Resonators

Authors

  • Atefeh Mirali Department of Electrical Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran
  • Ebrahim Farshidi Department of Electrical Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran
Abstract:

Abstract: In this paper, we aim to design and propose a novel structure for all-opticalhalf subtractor based on the photonic crystal. The structure includes two optical switches,one power splitter, and one power combiner. The optical switches are made of theresonant rings which use the nonlinear rods for dropping operation. The footprint of thedesigned structure is about 602 μm2 that is more compact than one in most works.Furthermore, despite some works, the input signals are the same in the phase angle andthe optical power. Also, each input signal is applied to one port while this issue has notbeen considered in some works. Plane wave expansion and finite difference time domainmethods are used to calculate the band diagram and simulation of the optical wavepropagation throughout the structure, respectively. The maximum obtained rise time ofall states of the proposed device is just about 1.4 ps. Besides, the presented structure iscapable of working at the third communication window so it can be matched with opticalfiber transmission systems.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Ultra-Fast All-Optical Symmetry 4×2 Encoder Based on Interface Effect in 2D Photonic Crystal

This paper deals with the design and simulation of all-optical 4×2 encoderusing the wave interference effect in photonic crystals. By producing 4 opticalwaveguides as input and two waveguides as output, the given structure was designed.The size of the designed structure is 133.9 μm2. The given all-optical encoder has acontrast ratio of 13.2 dB, the response time of 0.45 ...

full text

All-Optical Ultra compact Photonic Crystal Switch Based on Nonlinear Micro Ring Resonators

In this paper an all-optical switch has been proposed based on photonic crystal T-type ring resonator. The finite different time domain (FDTD) and plane wave extended (PWE) methods are used to analyze the behavior of the structure. The T-type ring resonator has a low switching time of about 0.95ps and low switching power equal to 156mW/μm 2 . Since the structure has a simple geometric shape wit...

full text

Quality Factor Enhancement of Optical Channel Drop Filters Based on Photonic Crystal Ring Resonators

In this paper, a channel drop ring resonator filter based on two dimensional photonic crystal is proposed which is suitable for all optical communication systems. The multilayer of silicon rods in the center of resonant ring enables one to adjust resonant wavelength of the ring and enhance power coupling efficiency between ring and waveguide. Refractive index and radius of multilayer rods insid...

full text

Add-Drop and Channel-Drop Optical Filters Based on Photonic Crystal Ring Resonators

Here, we propose an add-drop and a channel drop filter based on two-dimensional photonic crystal all circular ring resonators. These structures are made of a square lattice of silicon rods with the refractive index n1=3.464 surrounded by air (with refractive index n2=1). The broadest photonic band gap occurs at the filling ratio of r/a = 0.17. Two linear defect W1 waveguides couple to the ring....

full text

Novel Design of Optical Channel Drop Filter Based on Photonic Crystal Ring Resonators

In this paper, a new design of optical channel drop filter based on two- dimensional photonic crystal ring resonators with triangular lattice is proposed. The rods of this structure is silicon with the refractive index 3.46 and the surrounding environment is air with the refractive index of 1.The widest photonic band gap obtained is for filling ratio of r/a = 0.2. The filter’s transmission spec...

full text

All optical 1 to 2 decoder based on photonic crystal ring resonator

In this paper we combined an optical mixer via photonic crystal ringresonator to propose an all optical 1 to 2 decoder. The main idea used in this paper isbased on controlling the optical behavior of the resonant ring via optical powerintensity. We know that resonant wavelength of the photonic crystal ring resonator isvery sensitive upon the refractive index of dielectric rods, on the other had...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 5  issue 1

pages  83- 100

publication date 2020-01-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023