Two-fluid Electrokinetic Flow in a Circular Microchannel (RESEARCH NOTE)
author
Abstract:
The two-fluid flow is produced by the combined effects of electroosmotic force in a conducting liquid and pressure gradient force in a non-conducting liquid. The Poisson-Boltzmann and Navier-Stokes equations are solved analytically; and the effects of governing parameters are examined. Poiseuille number increases with increasing the parameters involved. In the absence of pressure gradient, the two fluids demonstrate plug-like velocity profiles. The results reveal that the two-fluid electroosmotic pumping flow rate is feasible for a relatively small interface zeta potential; or large wall zeta potential and electrokinetic radius. For particular values of the governing parameters, the flow rate approaches a specific value as the electrokinetic radius tends to infinity. A back flow (a negative value of the resultant flow rate) occurs for sufficiently small values of the wall zeta potential or sufficiently large values of the interface zeta potential (even in the case of pressure-assisted flow). Zero-value flow rates may also be attained.
similar resources
Electrokinetic and Sediment Remediation in Microbial Fuel Cell (RESEARCH NOTE)
Recently developed man-made structures have caused environmental pollutions, and unfortunately, in spite of the deteriorating affairs and repeated warnings by scientists and experts, the degree of contamination is increasing considerably. One of the natural sources undergoing changes is the coasts. It is mainly due to human activities which have led to a change in the quality and quantity of se...
full textNumerical investigation of AC electrokinetically induced fluid flow in a circular microchannel
AC-driven electrothermal flow is used to enhance the chaotic mixing through vortex flow in micro-fluidic systems by nearly an order of magnitude. Diffusion of heat and momentum can be increased because of the electrothermal force acting on the fluid through the applied AC electric field. Numerical simulation of vortex-assisted mixing in circular microchannel flow is investigated by solving a se...
full textinvestigation of heat transfer of engine oil-based nano fluid in circular microchannel with stairs in the flow path
0
full textControl of flow rate and concentration in microchannel branches by induced-charge electrokinetic flow.
This paper presents a numerical study of controlling the flow rate and the concentration in a microchannel network by utilizing induced-charge electrokinetic flow (ICEKF). ICEKF over an electrically conducting surface in a microchannel will generate vortices, which can be used to adjust the flow rates and the concentrations in different microchannel branches. The flow field and concentration fi...
full textSubcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models
Subcooled flow boiling in multi-microchannels can be used as an efficient thermal management approach in compact electrical devices. Highly subcooled flow boiling of HFE 7100 is studied in two microchannel heat sinks to choose a proper numerical model for simulating boiling flows in microchannels. Results of five different numerical models, including Volume of Fluid (VOF), Eulerian boiling, Eul...
full textVolume of Fluid Simulation of Boiling Two-phase Flow in a Vapor-venting Microchannel
Vapor-venting microchannel heat exchangers are promising because they address the problems of high pressure drop, flow instability, and local dryout that are common in conventional two-phase microchannel heat sinks. We present a 3D numerical simulation of the vapor-venting process in a rectangular microchannel bounded on one side by a hydrophobic porous membrane for phase-separation. The simula...
full textMy Resources
Journal title
volume 29 issue 10
pages 1469- 1477
publication date 2016-10-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023