Thermal and Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on PA6/NBR
Authors: not saved
Abstract:
This article doesn't have abstract
similar resources
Processing, Morphological, Thermal and Absorption Behavior of PLA/Thermoplastic Starch/Montmorillonite Nanocomposites
Thermoplastic starch, polylactic acid glycerol and maleic anhydride (MA) were compounded with natural montmorillonite (MMT) through a twin screw extruder to investigate the effects of different loading of MMT on structure, thermal and absorption behavior of the nanocomposites. X-ray diffraction analysis (XRD) showed that sample with MMT loading 4phr exhibited exfoliated structure while sample t...
full textelastomer nanocomposites based on organoclay/iir/epdm: microstructure and mechanical properties
nanocomposite samples based on elastomer blends of butyl rubber (iir) and ethylene propylene diene monomer (epdm) were prepared using a laboratory scale two-roll mill in order to study the effect of cloisite 15a organoclay content (i.e., 1, 3, 5 and 7 wt%) on the mechanical and morphological properties of iir/epdm/cloisite 15a nanocomposites compared to the unflled epdm/iir blends. rheo...
full textPolymer/montmorillonite nanocomposites with improved thermal properties. Part II: Thermal stability of montmorillonite nanocomposites based on different polymeric matrixes
In previous part of this work factors influencing the thermal stability of polymer nanocomposite materials were indicated, such as chemical constitution of organic modifier, filler content, nanocomposites’ structure and the processing-dependent degree of homogenization of nanofiller, were presented. In this part the basic changes in thermal behaviour of different polymeric matrixes (e.g. polyol...
full textOctasilsesquioxane reinforced DGEBA and TGDDM epoxy nanocomposites: Characterization of Thermal, Dielectric and Morphological properties
The octa-functionalized polyhedral oligomeric silsesquioxane (POSS) containing nanocomposites of epoxy resin are prepared via in situ co-polymerization of epoxy resins with 4,4’-diaminodiphenylsulfone (DDS) in the presence of octaaminophenyl silsesquioxane (OAPS). Two of the most common, technologically relevant epoxy resins, diglycidyl ether of bisphenol-A (DGEBA) and tetraglycidyl diamino dip...
full textMorphological, mechanical, and electrical properties as a function of thermal bonding in electrospun nanocomposites
Poly lactic acid (PLA) was electrospun with various concentrations of multi-wall carbon nanotubes (MWNT) and thermal bonding was utilized as a post-processing treatment to improve the mechanical and electrical properties of the nanofibrous mats. Thermally bonded fiberefiber junctions were observed with scanning electron microscopy. An increase in either the strength or modulus of the PLA mats b...
full textNanocomposite Coating Based on Thermoplastic Acrylic Resin and Montmorillonite Clay: Preparation and Corrosion Prevention Properties
Different amounts of nanoclay were incorporated into the acrylic resin matrix at 0, 1, 3, and 5 wt.% loadings. The coatings were applied on low carbon steel plates. Optical microscopy, sedimentation test, transmission electron microscopy, and X-ray diffraction were employed to investigate the dispersion of nanoclay in matrix. The corrosion resistance of coatings was evaluated by electrochemical...
full textMy Resources
Journal title
volume 8 issue 1
pages 56- 65
publication date 2011-01-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023