THEORETICAL AND NUMERICAL STUDY ON THE STRENGTHENED STEEL PLATE SHEAR WALLS BY FRP LAMINATES

Authors

Abstract:

In this paper, nonlinear behavior of strengthened steel plate shear walls (SPSWs) by FRP laminates theoretically and numerically has been investigated. In the first part, a new method, “the composite-plate frame Interaction (C-PFI) method”, has been introduced to predict the shear behavior of the composite steel plate shear wall systems (CSPSWs). In the second part, several models of one-story unstiffened and strengthened SPSWs have been simulated in finite element software, and all specimens are subjected to quasi-static cyclic loading. Comparison between results of FEM method and C-PFI method show that theoretical formulations can properly predict nonlinear behavior of CSPSWs. FEM results show that with strengthening infill steel plate on the steel plate shear walls, yield strength, ultimate shear capacity and secant stiffness of SPSWs can be significantly increased. Moreover, in the all strengthened SPSW the amount of cumulative dissipated energy were increased.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Field Assessment of Urm Walls Strengthened with Frp Laminates

Unreinforced masonry (URM) walls strengthened with composites were tested to failure at a decommissioned building in St. Louis, Missouri. The walls were subjected to out-of-plane loading. Previous work on URM as well as reinforced masonry walls strengthened with FRP laminates has shown remarkable increases in capacity and ductility. However, most of this research work has been conducted in the ...

full text

Experimental and Numerical Study of Perforated Steel Plate Shear Panels

Thin perforated Steel Plate Shear (SPS) Walls are among the most common types of energy dissipating systems. The applied holes reduce the shear strength of the plate and allow to decrease the profile size of the members at the boundary of the panel when these systems are used in the typical design of structures. On the other hand, the different fracture locations of these panels are visible whe...

full text

Comparison of plasticity and stiffness of steel shear walls with composite steel plate shear wall

The steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. Composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasin...

full text

Research Needs and Future Directions for Steel Plate Shear Walls

Steel plate shear walls (SPSWs) are one of the most economical and under-utilized lateral load resisting systems currently available to structural engineers. In comparison with traditional lateral load systems, such as steel braced frames, reinforced concrete walls and moment resisting frames, SPSWs have fewer costly detailing requirements, require less stringent construction tolerances, allow ...

full text

Plastic Analysis and Design of Steel Plate Shear Walls

A revised procedure for the design of steel plate shear walls is proposed. In this procedure the thickness of the infill plate is found using equations that are derived from the plastic analysis of the strip model, which is an accepted model for the representation of steel plate shear walls. Comparisons of experimentally obtained ultimate strengths of steel plate shear walls and those predicted...

full text

Non-Linear Behavior and Shear Strength of Diagonally Stiffened Steel Plate Shear Walls

In this study, non-linear behavior of diagonally stiffened steel plate shear walls as a seismic resisting system has been investigated, and theoretical formulas for estimating shear strength capacity of the system have been proposed. Several validated analytical finite element models of steel shear walls with various stiffener dimensions are generated to verify and compare the analytical and th...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 25  issue 1

pages  25- 37

publication date 2012-03-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023