The Effect of Geometrical Parameters of Cylindrical Composite Lattice Structures on Buckling Behavior

Authors

  • Amin Kolahdooz Assistant Professor, Young Researchers and Elite Club, Islamic Azad University, Khomeinishahr Branch, Isfahan/Khomeinishahr, Iran
  • R. Akbari Alashti Associate Prof., Department of Mechanical Engineering, Babol University of Technology, Mazandaran, Iran.
  • S.A. Latifi-rostami Master of Science, Department of Mechanical Engineering, , Babol University of Technology, Mazandaran, Iran.
Abstract:

Due to their light weights and high load carrying capacities, composite structures are widely used in various industrial applications especially in aerospace industry. Stiffening ribs are the main features of lattice type composite structures. Strength to weight ratio is known to be as one of the most critical design parameter in these structures. In this study, the effect of some parameters such as the physical characteristics of the material, shell thickness, angle, thickness and number of ribs on distribution of stresses and buckling loads of shell are investigated. For this purpose, 3D finite element analysis using ANSYS software explicitly was done and then compared with experimental test results. Increasing the thickness of the outer shell causes the structural strength will rise to 50 percent. The next effective parameter is reduction of rib angle which provides an increase of 30 percent in specific load. Although Stiffenerrs (ribs) have a major role in load carrying, but increasing the rib number causes the structural weight rises, thus compared with the two previous parameters do not have a significant effect on the strength of structures

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

investigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem

در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

Buckling Analysis of Composite Lattice Cylindrical Shells with Ribs Defects

In this paper, the buckling behavior of a composite lattice cylindrical shell is studied and effects of rib defects on the distribution of stress field and buckling response of the shell is investigated. A three dimensional finite element buckling analysis of the lattice shell is carried out using ANSYS suit of program. Geometrical data and material properties of the shell are obtained from the...

full text

A New Approach to Buckling Analysis of Lattice Composite Structures

Buckling strength of composite latticed cylindrical shells is one of the important parameters for studying the failure of these structures. In this paper, new governing differential equations are derived for latticed cylindrical shells and their critical buckling axial loads. The nested structure under compressive axial buckling load was analyzed. Finite Element Method (FEM) was applied to mode...

full text

the effect of taftan pozzolan on the compressive strength of concrete in the environmental conditions of oman sea (chabahar port)

cement is an essential ingredient in the concrete buildings. for production of cement considerable amount of fossil fuel and electrical energy is consumed. on the other hand for generating one tone of portland cement, nearly one ton of carbon dioxide is released. it shows that 7 percent of the total released carbon dioxide in the world relates to the cement industry. considering ecological issu...

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 8  issue 3

pages  197- 207

publication date 2015-11-22

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023