Temperature Effect on THz Quantum Cascade Lasers
Authors
Abstract:
A simple semi-phenomenological model, which accurately predicts the dependence of thresholdcurrent for temperature of Resonant-phonon three well quantum cascade laser based on verticaltransitions is offered. We found that, the longitude optical phonon scattering of thermally excitedelectrons is the most important limiting factor for thermal performance of high frequency THz QCLs.In low frequency region, parasitic current increases the threshold current. Based on our model the useof materials with higher longitude optical phonon energy such as InGaAs/GaAsSb and decreasing thelower laser level lifetime can increase the maximum performance temperature. Our observations maycan be used to understand the notion of the effects of thermal electrons on reduction of laserperformance.
similar resources
temperature effect on thz quantum cascade lasers
a simple semi-phenomenological model, which accurately predicts the dependence of thresholdcurrent for temperature of resonant-phonon three well quantum cascade laser based on verticaltransitions is offered. we found that, the longitude optical phonon scattering of thermally excitedelectrons is the most important limiting factor for thermal performance of high frequency thz qcls.in low frequenc...
full textDesign Optimization for 4.1-THZ Quantum Cascade Lasers
We present an optimized design for GaAs/AlGaAs quantum cascade lasers operating at 4.1THz. This was based on a three-well active module with diagonal radiative transition. This was performed by modifying the existing model structure, to reduce the parasitic anticrossings (leakage currents) as well as the optical gain linewidth. While the gain FWHM was reduced by more than 50% the gain pea...
full text“High-temperature and high-power THz quantum cascade lasers”
The highest temperature performance in terahertz QCLs has been demonstrated by using active regions based on the resonant-phonon depopulation scheme along with metalmetal waveguides to provide low-loss confinement, which have been used to demonstrate maximum temperatures of 164 K in pulsed mode and 117 K in cw mode. It is expected that there are two primary mechanisms which reduce the populatio...
full textInvestigating temperature degradation in THz quantum cascade lasers by examination of temperature dependence of output power
In this paper, we demonstrate a method to investigate the temperature degradation of THz quantum cascade lasers (QCLs) based on analyzing the dependence of lasing output power on temperature. The output power is suggested to decrease exponentially with some characteristic activation energy indicative of the degradation mechanism. As a proof of concept, Arrhenius plots of power versus temperatur...
full textHigh-power and high-temperature THz quantum-cascade lasers based on lens-coupled metal-metal waveguides.
A metal-metal waveguide quantum cascade laser with an abutted silicon hyperhemispherical lens is demonstrated at ~4.1 THz. The device produced 145 mW of peak pulsed power at 5 K with a wall-plug power efficiency of 0.7%, lasing up to a maximum operating temperature of 160 K. The far-field beam pattern has a full width at half-maximum value of ~4.8 degrees in the H plane. The same device produce...
full textHot-phonon generation in THz quantum cascade lasers
Observation of non-equilibrium optical phonons population associated with electron transport in THz quantum cascade lasers is reported. The phonon occupation number was measured by using a combination of micro-probe photoluminescence and Stokes/Anti-Stokes Raman spectroscopy. Energy balance analysis allows us to estimate the phonon relaxation rate, that superlinearly increases with the electric...
full textMy Resources
Journal title
volume 2 issue 6
pages 26- 32
publication date 2013-08-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023