Synthesize of Ion Imprinted Polymer for Selective Extraction of lead (II) from Environmental Water Samples
Authors
Abstract:
A new Pb(II) imprinted mercapto functionalized Montmorillonite was synthesize by an easy one step reaction by combining a surface imprinting technique for selective phase extraction of Pb(II) prior to its determinations by flame atomic absorption spectroscopy. The modified sorbent was characterized by FTIR and studied for preconcentration and determination of Pb(II) in natural water samples. The optimum pH value for sorption of lead (II) was 5.5. A recovery of 100% was obtained for lead (II), with 0.5 M nitric acid as eluting agent. The kinetic study reveals good accessibility of the chelating sites in the imprinted sorbent for uptake of selected ion. The sorption capacity was obtained at 27 mg·g−1 at optimum condition and 20o C.
similar resources
synthesizeof ion imprinted polymer for selective extraction of lead (ii) from environmental water samples
full text
Nickel Adsorption from Environmental Samples by Ion Imprinted Aniline -Formaldehyde Polymer
In this study, aniline-formaldehyde polymer was synthesized and then modified with extra aniline as cross-linker in the presence and absence of Ni(II) as the template to produce Ion Imprinted Poly(Aniline-Formaldehyde) (IIPAF) and Non Imprinted Poly(Aniline-Formaldehyde)(NIPAF) The IIPAF was subjected to adsorption, preconcentration and determination of Ni(II) ion in envir...
full textSynthesis of Molecularly Imprinted Polymer for Selective Solid-Phase Extraction of Salbutamol from Urine Samples
A highly selective methacrylic based molecularly imprinted polymer (MIP) was synthesized and applied for the separation and the pre-concentration of salbutamol in urine samples. Spectrophotometric determination of salbutamol was achieved using 2,6-dichloroquinone chlorimide as colorimetric reagent. The detection limit of the method was ca. 13 ng mL in urine after pre-concentration of the sample...
full textAn Electrochemical Sensor Based on Novel Ion Imprinted Polymeric Nanoparticles for Selective Detection of Lead Ions
In this study, the novel surface ion-imprinted polymer (IIP) particles were prepared and applied as a electrode modifier in stripping voltammetric detection of lead(II) ion. A carbon paste electrode (CPE) modified with IIP nanoparticles and multi-walled carbon nanotubes (MWCNTs) was used for accumulation of toxic lead ions. Various factors that govern on electrochemical signals including carbon...
full textnickel adsorption from environmental samples by ion imprinted aniline -formaldehyde polymer
in this study, aniline-formaldehyde polymer was synthesized and then modified with extra aniline as cross-linker in the presence and absence of ni(ii) as the template to produce ion imprinted poly(aniline-formaldehyde) (iipaf) and non imprinted poly(aniline-formaldehyde)(nipaf) the iipaf was subjected to adsorption, preconcentration and determination of ni(ii) ion in environmental samples. the ...
full textMy Resources
Journal title
volume 7 issue 1
pages 43- 49
publication date 2013-11-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023