SYNTHESIS AND CORROSION PROTECTION BEHAVIOR OF EPOXYTiO2-MICACEOUS IRON OXIDE NANO - COMPOSITE COATING ON St-37

Authors

  • D. Zaarei South Tehran Branch, Islamic Azad University
  • Iman Danaee Abadan Faculty of Petroleum Engineering, Petroleum University of Technology
  • M. R. Khorram Abadan Faculty of Petroleum Engineering, Petroleum University of Technology
  • M. R. Shishesaz Abadan Faculty of Petroleum Engineering, Petroleum University of Technology
Abstract:

The micro layers micaceous iron oxide and nano-TiO 2 were incorporated into the epoxy resin by mechanical mixing and sonication process. Optical micrographs showed that the number and diameter size of nanoparticle agglomerates were decreased by sonication. The structure and composition of the nanocomposite was determined using transmission electron microscopy which showed the presence of dispersed nano-TiO 2 in the polymer matrix. The anticorrosive properties of the synthesized nano-composites coating were investigated using salt spray, electrochemical impedance spectroscopy and polarization measurement. The EIS results showed that coating resistance increased by addition of micaceous iron oxide micro layers and nano-TiO 2 particles to the epoxy coatings. It was observed that higher corrosion protection of nanocomposite coatings obtained by the addition of 3 %wt micaceous iron oxide and 4%wt nano-TiO 2 into epoxy resin.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Effect of nano-Al2O3 particles concentration on microstructure and corrosion behavior of Co-P-nano-Al2O3 composite coating

Composite coatings containing P and ceramic particles are considered in terms of properties such as corrosion resistance, oxidation resistance and high hardness. In this study, Co-P-nanoAl2O3 composite coating was fabricated on the AISI 430 stainless steel substrate using a direct current electric deposition technique. The quality of the coating and its corrosion resistance were studied by chan...

full text

STUDY ON CORROSION BEHAVIOR OF COBALT NANO COMPOSITE COATINGS

Metal matrix nano composite coatings possess enhanced properties such as corrosion and wear resistance. This paper aims to study the corrosion behavior of pure Co and Co-BN nano composite coatings deposited with different particles concentration (5-20 g L-1) on copper substrates using electroplating technique. Morphology and elemental compositions of the coatings were investigated by means of s...

full text

Studying the Corrosion Protection Behavior of an Epoxy Composite Coating Reinforced with Functionalized Graphene Oxide by Second and Fourth Generations of Poly(amidoamine) Dendrimers (GO-PAMAM-2, 4)

In this research, graphene oxide (GO) nanoparticles were modified by second and fourth generations of poly(amidoamine) dendrimers in order to improve the particle dispersion quality in the epoxy matrix and therefore its barrier anti-corrosion performance. Confirmation on the GO surface modification by Polyamidoamine generation 2 (PAMAM2) and polyamidoamin generation 4 (PAMAM4) was carried o...

full text

Preparation and corrosion behavior evaluation of amalgam/titania nano composite

BACKGROUND Many attempts have been performed and continued for improvement of dental amalgam properties during last decades. The aim of present research was fabrication and characterization of amalgam/titania nano composite and evaluation of its corrosion behavior. MATERIALS AND METHODS In this experimental research, nano particles of titania were added to initial amalgam alloy powder and the...

full text

Corrosion protection of iron using porous anodic oxide/conducting polymer composite coatings.

Conducting polymers (CPs), including polypyrrole, have attracted attention for their potential in the protection of metals against corrosion; however, CP coatings have the limitation of poor adhesion to metal substrates. In this study, a composite coating, comprising a self-organized porous anodic oxide layer and a polypyrrole layer, has been developed on iron. Because of electropolymerization ...

full text

synthesis of amido alkylnaphthols using nano-magnetic particles and surfactants

we used dbsa and nano-magnetic for the synthesis of amido alkylnaphtols.

15 صفحه اول

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 13  issue 1

pages  11- 20

publication date 2016-03

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023