Synergistic Signal Amplification Based on Ionic Liquid-BaTiO3 Nanoparticle Carbon Paste Electrode for Sensitive Voltammetric Determination of Acetaminophen
Authors
Abstract:
Monitoring the acetaminophen in biological samples and also in pharmaceutical formulations is important due to the concerns of public health care and drug safety. In this work a carbon paste electrode modified with BaTiO3 nanoparticle (BTO NPs) and room-temperature ionic liquid (IL) (n-hexyl-3-methylimidazolium hexafluoro phosphate) was fabricated. The direct electro-oxidation behavior of acetaminophen (AC) was carefully studied by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and chronoamperometry (CHA) and the diffusion coefficient, D of acetaminophen at the BTOILCPE surface was estimated. The results exhibited remarkable increase in the electron transfer rate and significant decrease in the overpotential for acetaminophen oxidation reaction in contrast to that on the bare carbon paste electrode (CPE). Under the optimal conditions, using DPV the oxidation peak current was linear to the acetaminophen concentration over the range of 1.0 to 600.0 μM with a detection limit of 0.46 μM. The proposed sensor was successfully applied in pharmaceutical and urine samples with satisfactory results.
similar resources
Sensitive Voltammetric Detection of Indomethacin Using TiO2 Nanoparticle Modified Carbon Ionic Liquid Electrode
In this work, a TiO2 nanoparticle modified carbon ionic liquid electrode (CILE) was employed as a sensitive sensor for the investigation of the electrochemical behavior of indomethacin (IND). This nanocomposite sensor has been fabricated by incorporation of TiO2 nanoparticles and the ionic liquid 1-hexylpyridinium hexafluorophosphate (HPFP). The surface of the electrode was studied by scanning ...
full textElectrochemical Behaviors and Sensitive Determination of Guanosine-5’-monophosphate on Ionic Liquid Modified Carbon Paste Electrode
A new electrochemical sensor was fabricated by using ionic liquid (IL) 1-octyl-3-methylimidazolium hexafluorophosphate (OMIMPF6) modified carbon paste electrode (denoted as IL-CPE). The electrode was characterized by scanning electron microscopy, cyclic voltammetry and electrochemical impedance spectroscopy. Due to the presence of high conductive IL in the carbon paste electrode, IL-CPE exhibit...
full textElectrochemical Behavior and Highly Sensitive Voltammetric Determination of Doxepin in Pharmaceutical Preparations and Blood Serum Using Carbon Ionic Liquid Electrode
In this manuscript, the electrocatalytic oxidation of doxepin (DOX) was studied at a carbon ionic liquid electrode, fabricated using graphite, and the ionic liquid 1-octylpyridinium hexaflourophosphate (OPFP). The surface of the proposed electrode was characterized by scanning electron microscopy. Differential pulse voltammetry was applied as an analytical technique for quantification of sub-mi...
full textElectrochemical Behavior and Highly Sensitive Voltammetric Determination of Doxepin in Pharmaceutical Preparations and Blood Serum Using Carbon Ionic Liquid Electrode
In this manuscript, the electrocatalytic oxidation of doxepin (DOX) was studied at a carbon ionic liquid electrode, fabricated using graphite, and the ionic liquid 1-octylpyridinium hexaflourophosphate (OPFP). The surface of the proposed electrode was characterized by scanning electron microscopy. Differential pulse voltammetry was applied as an analytical technique for quantification of sub-mi...
full textVoltammetric Determination of Venlafaxine by Using Multiwalled Carbon Nanotube- Ionic Liquid Composite Electrode
The combination of multi-walled carbon nanotubes and ionic liquid 1-octylpyridinium hexaflourophosphate (OPFP) yields a carbon nanocomposite (MWCNT-CILE) that can be well used aselectrode for electrocatalytic oxidation of venlafaxine (VEN). The influence of variousexperimental parameters including pH of the solution, the amount of multi-walled carbon nanotubeused for the modification of the car...
full textA Sensitive Voltammetric Sensor for Determination of Glutathione Based on Multiwall Carbon Nanotubes Paste Electrode Incorporating Pyrogallol Red
A new sensitive and selective electrochemical sensor was developed for determination of glutathione (GSH) at the surface of carbon paste electrode (CPE) modified with multi-wall carbon nanotubes (MWCNTs) as a sensor and pyrogallol red (PGR) as a mediator. The mechanism of GSH electrochemical behavior at the modified electrode surface was investigated by various electrochemical techniques includ...
full textMy Resources
Journal title
volume 5 issue 2
pages 261- 271
publication date 2018-12-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023