Studies on Structural and Optical Characterization of In-Zn-S Ternary Thin Films Prepared by Spray Pyrolysis

Authors

  • F. Rahman Department of Physics, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh
  • J. Podder Department of Physics, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh
  • M. Ichimura Department of Electrical and Electronic Engineering, Nagoya Institute of Technology, Nagoya-466-8555, Japan
Abstract:

Thin films of indium doped zinc sulfide (ZnS) for different indium (In) concentrations (x=0.0 - 0.8) were deposited onto glass substrate by spray pyrolysis method at 523K temperature. Aqueous solution of zinc acetate, indium chloride and thiorea were used to deposit the In-Zn-S film. The deposited thin films were characterized by Energy dispersive X-ray (EDX), Scanning electron microscopy (SEM), X-ray diffraction (XRD), and by UVvisible spectroscopy. The XRD spectra of In-Zn- S revealed both the amorphous and polycrystalline property for different In concentration. The EDX showed a well stoichiometric result of different compositions of In in ZnS thin films. The granularity of irregular shape is observed in In doped ZnS thin films surface by scanning electron microscope. From the absorbance and transmittance data it is observed that the band gap energy is decreased from 3.75eV to 3.1eV with the increase of In concentration in ZnS.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

The effect of Ga-doping on the structural and optical properties of ZnO thin films prepared by spray pyrolysis

In this research, zinc oxide thin films with gallium impurity have been deposited using the spray pyrolysis technique. The structural and optical properties of these films are investigated as a function of gallium doping concentrations. The ZnO and ZnO:Ga  films grown at a substrate temperature of 350 ºC with gallium doping concentrations from 1.0 to 5.0.%. The XRD analysis indicated that ZnO f...

full text

Structural and electrical properties of In-doped vanadium oxide thin films prepared by spray pyrolysis

The In-doped vanadium pentoxide nanostructures with different doping levels including 0, 10, 20 and 30 at.% were prepared by the spray pyrolysis technique. The prepared thin films were characterized by the x-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD results revealed that the films were crystalline in tetragonal phase. Increasing the In-doping level made the structure...

full text

Structural and Optical Properties of ZnS Thin Films Prepared by Spray Pyrolysis Technique

Zinc Sulfide (ZnS) is important II-VI semiconductors material for the development of various modern technologies and photovoltaic applications. ZnS thin film was prepared by using chemical spray pyrolysis technique. The spray solutions contains ZnCl2 and SC(NH2)2 with molar concentration 0.1M/L. ZnS thin films was growth onto hot glass substrates at substrates temperature 400C. The Structure of...

full text

Structural and morphological characterization of ternary nanocrystalline Cu-In-S thin films prepared by laser ablation

Thin nanocrystalline Cu-In-S films are prepared by pulsed laser ablation in vacuum with Nd:YAG laser operating at 1064 nm on Si (100) substrates. As a target, a CuInS2 quantum dots powder, synthesized by sonochemical template-free colloidal approach and pressed to form a pellet is used. The structure and morphology of the deposited films were studied employing Xray diffraction, scanning electro...

full text

Deposition and characterization of SnO2:Sb thin films fabricated by the spray pyrolysis method

In this study, thin films of transparent semiconductor tin oxide doped with antimony impurities on the glass substrates with different concentrations of antimony that have been prepared using spray pyrolysis method. The effects of different concentration of antimony on the structural, optical, and electrical properties of the thin films were investigated. Prepared layers were characterized by X...

full text

Structural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films

Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 5  issue None

pages  79- 86

publication date 2011-07

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023