Structural Evolution of Al-20% (wt) Al2O3 System during Ball Milling Stages
Authors
Abstract:
Production of nanostructured aluminum matrix composite powder by high energy ball milling is investigated. Scanning electron microscopy analysis as well as the tap and green density measurements were used to optimize the milling time needed for the completion of the mechanical milling process. Also, we studied the particles morphology and size distribution change with milling time and its correlation with pressability and tap density. SEM showed that distribution of alumina particles in the Al matrix reaches a full homogeneity after the steady state. This would increase the hardness of powder due to a nano-structured matrix and oxide dispersion strengthening.
similar resources
Effect of Mechanical Milling on the Morphologyand Structural Evaluation of Al-Al2O3 Nanocomposite Powders
The morphological and microstructural changes during mechanical milling of Al powder mixed with 2.5, 5 and 10 wt.% Al2O3 particles were studied. The milling was performed in a planetary ball mill for various times up to 20 h. The produced composite powders were investigated using X-ray diffraction pattern (XRD) to elucidate the role of particle size, secondary phase content and milling time on ...
full textDefects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling
Nano fillers are part of new studies to enhance various properties of fluids and solids. For example, adding nanoparticles as an enforcement in nanocomposites or as an additive to improve thermal or electrical properties in nano-fluids are of extreme importance in science and industry. There are numerous methods to uniformly disperse nanoparticles in fluid and solid phase. One of the well-used ...
full textdefects and structural analysis of multi-wall carbon nano tubes via ball milling and cryo-milling
nano fillers are part of new studies to enhance various properties of fluids and solids. for example, adding nanoparticles as an enforcement in nanocomposites or as an additive to improve thermal or electrical properties in nano-fluids are of extreme importance in science and industry. there are numerous methods to uniformly disperse nanoparticles in fluid and solid phase. one of the well-used ...
full textEffect of Milling Time on the Microstructure, Physical and Mechanical Properties of Al-Al2O3 Nanocomposite Synthesized by Ball Milling and Powder Metallurgy
The effect of milling time on the morphology, microstructure, physical and mechanical properties of pure Al-5 wt % Al₂O₃ (Al-5Al₂O₃) has been investigated. Al-5Al₂O₃ nanocomposites were fabricated using ball milling in a powder metallurgy route. The increase in the milling time resulted in the homogenous dispersion of 5 wt % Al₂O₃ nanoparticles, the reduction of particle clustering, and the red...
full textDynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process
In this research, the feasibility of using mathematical modelling in the ball milling process has been evaluated to verify the hardness changes of an aluminium nanostructure. Considering the model of normal force displacement (NFD), the radius of elastic-plastic and normal displacement of two balls were computed by applying analytical modelling and coding in MATLAB. Properties of balls and alum...
full textMicrostructural Evolution, Thermodynamics, and Kinetics of Mo-Tm2O3 Powder Mixtures during Ball Milling
The microstructural evolution, thermodynamics, and kinetics of Mo (21 wt %) Tm₂O₃ powder mixtures during ball milling were investigated using X-ray diffraction and transmission electron microscopy. Ball milling induced Tm₂O₃ to be decomposed and then dissolved into Mo crystal. After 96 h of ball milling, Tm₂O₃ was dissolved completely and the supersaturated nanocrystalline solid solution of Mo ...
full textMy Resources
Journal title
volume 22 issue 2
pages 169- 178
publication date 2009-08-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023