Separation of Ultra - Fine Sulphur Particles from Nta Dispersion by Aphron Flotation
author
Abstract:
Oxidative scrubbing is used to remove H2S from gas streams. A key problem in regeneration of the absorbent is the removal of fine particles of sulphur from the suspension of the scrubbing liquid. Dispersions of ultra-fine bubbles have been called "colloidal gas aphrons" or aphrons for short. These dispersions have interesting properties and it was found that they have particular advantages in the removal of ultra-fine particles of sulphur.
similar resources
SYNTHESIS OF ULTRA-FINE PARTICLES OF BAFE12O19 BY CO- PRECIPITATION ROUTE USING CHLORIDE/NITRATE PRECURSORS
Ultra-fine particles of barium hexaferrite have been synthesized by co-precipitation method using barium nitride and iron chloride precursors with a Fe/Ba molar ratio of 11. Co-precipitation was carried out at 25 and 80°C using NaOH as a precipitant. Effect of coprecipitation and annealing temperatures on the phase composition and morphology of the products have been investigated using XRD and ...
full textAbility of Aphron Flotation in Whey Treatment
Whey contains more than half of total solids present in the original milk, which includes 20% of the proteins, most of the lactose, minerals and water soluble vitamins. In this study, selective separation of whey components by Aphron flotation (separation of ultrafine particles by micro-bubbles) has been investigated. It has been shown that it is possible to recover valuable components of w...
full textability of aphron flotation in whey treatment
whey contains more than half of total solids present in the original milk, which includes 20% of the proteins, most of the lactose, minerals and water soluble vitamins. in this study, selective separation of whey components by aphron flotation (separation of ultrafine particles by micro-bubbles) has been investigated. it has been shown that it is possible to recover valuable components of whey ...
full textSimultaneous Ash and Sulphur Removal from Bitumen Using Column Flotation Technique: Experiments, RSM Modeling and Optimization
An efficient method was employed for the ash and pyrite sulphur removal from bitumen using column flotation process. The bitumen samples containing 9.6% sulphur (6.81% in the pyrite sulphur form) and 26.4% ash were successfully showed up to 75.20% of pyrite sulphur (e.g.; 51.66% of total sulphur) and 70.81% of ash removal. The Box-Behnken Design (BBD) was employed to design the experiments, to ...
full textKinetic Modelling of As (V) Separation by Dissolved Air Flotation
LIGIA STOICA1, ADRIANA IRIMIA1*, GABRIELA CARMEN OPROIU2, VIOREL ORDEANU3 1 University “Politehnica” of Bucharest, Faculty of Applied Chemistry and Materials Science, Department of Inorganic Chemistry, 1-3 Polizu Str., 011061, Bucharest, Romania 2 University Politehnica of Bucharest, Department of Teaching Staff Training and Socio-Humanities, 313 Splaiul Independeþei, 060042, Bucharest, Romania...
full textAsh and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling
This study investigates removing ash and pyrite sulphur from bitumen by column flotation process. Central composite design (CCD) of response surface methodology (RSM) was applied for modeling and optimization of the percentage of ash and pyrite sulphur removal from bitumen. The effects of five parameters namely the amounts of collector and frother agents, particle size, wash water rate and feed...
full textMy Resources
Journal title
volume 3 issue 3
pages 148- 153
publication date 1990-11-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023