Roasting Process Optimization of Walnut Kernels for the Preparation of Walnut Cream Using Response Surface Methodology
Authors
Abstract:
Roasting has considerable effects on the quality of cream made of nuts. In this study, the roasting conditions of walnut kernels were optimized based on the stability parameters of the produced cream. Temperatures of 100-150°C for 10-30 minutes were used to roast walnut kernels. The amount of oil separation, peroxide, acidity and Thiobarbituric acid values of the cream, as well as color parameters were determined after three months of storage at 25°C. The results showed that the oil separation increased with temperature and time of roasting (from 4.16% at 100°C/10min to 7.85% at 150°C/30min). Peroxide, acidity and thiobarbituric acid values were significantly affected by temperature and time of roasting. In addition, it was shown that as the temperature increased, the redness and yellowness increased, but the lightness of the samples decreased. Finally, the temperature of 116°C for 12 minutes was chosen as the optimized roasting conditions for producing walnut cream.
similar resources
roasting process optimization of walnut kernels for the preparation of walnut cream using response surface methodology
roasting has considerable effects on the quality of cream made of nuts. in this study, the roasting conditions of walnut kernels were optimized based on the stability parameters of the produced cream. temperatures of 100-150°c for 10-30 minutes were used to roast walnut kernels. the amount of oil separation, peroxide, acidity and thiobarbituric acid values of the cream, as well as color paramet...
full textpreparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis
کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.
Preparation of U3O8 by Calcination from Ammonium Uranyl Carbonate Using Response Surface Methodology: Process Optimization
The parameters to prepare U3O8 by calcination from ammonium uranyl carbonate were optimized by using response surface methodology. A quadratic equation model for the value of total uranium and U4+ of triuranium octaoxide was built and the effects of main factors and their corresponding relationships were obtained. The statistical analysis of the results indi...
full textPhotocatalytic Removal of Amaranth Optimization Using Response Surface Methodology
Since Amaranth (AM) is one of the dye compounds which is harmful to human’s life its removal from industrial waste water would reduce their environmental impact and health effect. Copper nanoparticle (CuNP) is a simple and eco-friendly material which can be used to remove this pollutant. In this paper, copper nanoparticles were synthesized, for removal of AM dye. The experiments were designed b...
full textOptimization of Growth Conditions of Lentinus edodes Mycelium and polysaccharides on Walnut shell by-products Using Response Surface Analysis
Lentinus edodes (L. edodes) is one of the most famous traditional Chinese medicines and high producer of various bioactive compounds such as polysaccharides. Modern pharmaceutical research shows that the Polysaccharides (LEPLS) of this mushroom is a kind of bioactive compound with clinical significance in medicine and several physiological effects. Up to now, fermentation system has been widely...
full textthe use of appropriate madm model for ranking the vendors of mci equipments using fuzzy approach
abstract nowadays, the science of decision making has been paid to more attention due to the complexity of the problems of suppliers selection. as known, one of the efficient tools in economic and human resources development is the extension of communication networks in developing countries. so, the proper selection of suppliers of tc equipments is of concern very much. in this study, a ...
15 صفحه اولMy Resources
Journal title
volume 08 issue 01
pages 31- 40
publication date 2017-05-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023