Response Modification Factor of Coupled Steel Shear Walls
Authors
Abstract:
The present research is concerned with the determination of ductility, over-strength and response modification factors of coupled steel shear wall frames. Three structural models with various numbers of stories, bay width and coupling beam height were analyzed using static pushover and incremental nonlinear dynamic analyses. The ductility, over-strength and response modification factors for the three models are determined. Tentative values of 11.1, 11.6 and 10.6 are suggested for the response modification factor of coupled steel shear wall frames with deep and medium depth coupling beams, and uncoupled steel shear wall frames, respectively in the allowable stress design method.
similar resources
response modification factor of coupled steel shear walls
the present research is concerned with the determination of ductility, over-strength and response modification factors of coupled steel shear wall frames. three structural models with various numbers of stories, bay width and coupling beam height were analyzed using static pushover and incremental nonlinear dynamic analyses. the ductility, over-strength and response modification factors for the...
full textThe Effect of Spandrel Beam's Specification on Response Modification Factor of Concrete Coupled Shear Walls
Response modification factor (R factor) is one of the seismic design parameters to be considered in evaluating the performance of buildings during strong motions. This paper has tried to evaluate the response modification factor of concrete coupled shear wall structures with various length/depth ratios of spandrel beams. The effect of diagonal reinforcement of spandrel beam was also evaluated o...
full textthe effect of spandrel beam's specification on response modification factor of concrete coupled shear walls
response modification factor (r factor) is one of the seismic design parameters to be considered in evaluating the performance of buildings during strong motions. this paper has tried to evaluate the response modification factor of concrete coupled shear wall structures with various length/depth ratios of spandrel beams. the effect of diagonal reinforcement of spandrel beam was also evaluated o...
full textnon-linear study of various slit shear walls in steel structures
seismic retrofit strategies have been developed in the past few decades following the introduction of new seismic provisions and the availability of advanced materials and methods. it can be observed that new approaches to deal with more lateral forces are more innovative and more energy absorbent. in line with this, there is a growing trend toward the use of steel shear walls as a system with ...
15 صفحه اولresponse of coupled-precast shear walls subjected to cyclic loads
large panel precast structures are analyzed based on the connection rigidity. however, the connections undergo nonlinear and inelastic response, when subjected to seismic loads. thus, to study the actual behavior of structure, the connection nonlinearity should be implemented in the joints. in this paper, three conventional connection types are modeled based on the envelope of their cyclic resp...
full textComparison of plasticity and stiffness of steel shear walls with composite steel plate shear wall
The steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. Composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasin...
full textMy Resources
Journal title
volume 46 issue 1
pages 15- 26
publication date 2013-06-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023