Reoxidation Rate of Sponge Iron Pellets, Briquettes and Iron Powder Compressed to Various Compressions in Air
author
Abstract:
The reoxidation rate of sponge iron pellets and briquettes and oxidation of pure iron powder with compressibility between 27% and 55% in air and within the temperature range 300-900°C has been investigated. Factors affecting the oxidation rate are presented. These include the effect of temperature, compressibility, and sintering of Fe-powder before and during the oxidation.
similar resources
petrology and geochemistry of khar-bash (western shahrood) and its relation ship to iron mineralization
منطقه مورد مطالعه در 23 کیلومتری جنوب غرب شهرستاشاهرود قرار دارد که در نقشه 100000/1 شاهرود قرار گرفته است.ناحیه مورد مطالعه در تقسیمات ساختاری ایران بخشی از زون البرز شرقی است . در طی سنوزوئیک این زون به شدت تحت تأثیر فازهای کوهزایی آلپی قرار گرفته و فعالیت های آتشفشانی انوسن در قسمت های غربی آن دیده می شود . از نظر ترکیب سنگ شناسی منطقه مورد مطالعه متنوع و بیشتر شامل سنگ های رسوبی مانند : آ...
15 صفحه اولthe rate of oxidation of sponge iron pellets briqette and their physical and chemical properties
to understand the rate of oxidation of sponge irons and its mechanisim, their physical and chemical properties are normally required. in this report attempt has been made to show the results of research on varius pellets and briqutts produced at ahwaz steel complex. in presenting these data, the rate of oxidation of these articles in air between 300 and 600 °c is also quotted and analysed. in a...
full textDetermination of Relationship between Autoignition of Sponge Iron and Specification of the Iron Ores
Sponge iron (DRI) due to the high surface area, often shows a high tendency to re-oxidation and at some cases spontaneous combustion (autoignition). In this work, re-oxidation behavior and autoignition of sponge iron, produced from different types of iron ore has been investigated. Isothermal and non-isothermal re-oxidation experiments were carried out on each type of DRI and their autoignition...
full textDetermination of Relationship between Autoignition of Sponge Iron and Specification of the Iron Ores
Sponge iron (DRI) due to the high surface area, often shows a high tendency to re-oxidation and at some cases spontaneous combustion (autoignition). In this work, re-oxidation behavior and autoignition of sponge iron, produced from different types of iron ore has been investigated. Isothermal and non-isothermal re-oxidation experiments were carried out on each type of DRI and their autoignition...
full textMicrowaves Applied to Carbothermic Reduction of Iron Ore Pellets
Results of reducibility tests of reduction conducted on iron ore pellets with carbon are presented in this work. Work done is centered on reduction kinetics using carbon as reducing agent with conventional heat supply (heat transfer process) compared with reduction kinetics where heat is supplied by microwaves to the whole volume. Ore used in this work is called "Alzada" which has reducibility ...
full textEvaluation of Nitrogen Diffusion in Plasma Nitrided Iron by Various
Diffusion of nitrogen in plasma nitrided iron and structural evolution during the nitriding process were evaluated by several characterization techniques including optical microscopy (OM), microhardness depth profiling (HDP), scanning electron microscopy (SEM), x-ray diffraction (XRD), glow discharge optical emission spectroscopy (GDOES), and secondary ion mass spectroscopy (SIMS). Plasma ni...
full textMy Resources
Journal title
volume 1 issue 2
pages 111- 116
publication date 1988-08-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023