Preparation and Properties of Polycaprolactone/Poly (Butylene Terephthalate) Blend
Authors
Abstract:
Polycaprolactone (PCL) and poly(butylene terephthalate) (PBT) blend was prepared by melt processing. The PCL/PBT blend showed similar morphology with that of pure PCL.The crystallization temperature of PCL was increased by the incorporation of PBT. It was also observed that the peak height in the DSC thermograms decreased and then disappeared by adding 40 % or more PBT which might be due to the transestrification between –OH end groups of PCL and ester groups of PBT. The size of PCL spherulites was about 13 µm which decreased highly in the case of blends due to the nucleation effect. The thermal stability of the PCL/PBT blend was higher than pure PCL.
similar resources
preparation and properties of polycaprolactone/poly (butylene terephthalate) blend
polycaprolactone (pcl) and poly(butylene terephthalate) (pbt) blend was prepared by melt processing. the pcl/pbt blend showed similar morphology with that of pure pcl.the crystallization temperature of pcl was increased by the incorporation of pbt. it was also observed that the peak height in the dsc thermograms decreased and then disappeared by adding 40 % or more pbt which might be due to the...
full textPhase Morphology and Mechanical Properties of Cyclic Butylene Terephthalate Oligomer-Containing Rubbers: Effect of Mixing Temperature
In this work, the effect of mixing temperature (Tmix) on the mechanical, rheological, and morphological properties of rubber/cyclic butylene terephthalate (CBT) oligomer compounds was studied. Apolar (styrene butadiene rubber, SBR) and polar (acrylonitrile butadiene rubber, NBR) rubbers were modified by CBT (20 phr) for reinforcement and viscosity reduction. The mechanical properties were deter...
full textinvestigation of thermal comfort properties of woven sport fabric using blend of estabragh fibers
امروزه لباس در نظر ورزشکاران و کسانی که برای اوقات فراغت خود و یا برای رسیدن به اندامی متعادل، ورزش می کنند؛ بسیار با اهمیت است. احساس مطلوب از لباس در زمره خصوصیات راحتی پوشش می باشد. خصوصیات انتقال رطوبت لباس، در ارزیابی راحتی حسی و حرارتی منسوجات تولید شده از آن ها بسیار مهم است. هدف از این تحقیق، معرفی پارچه جدید است که متشکل از الیاف استبرق با خواص منحصر به فرد می باشد. استبرق لیف طبیعی تو...
Novel Bifunctional Additive for Rubbers: Cyclic Butylene Terephthalate Oligomer
In this paper the effect of a novel bifunctional additive [cyclic butylene terephthalate (CBT)] was investigated on the rheological, curing and mechanical properties of natural rubber (NR), styrene butadiene rubber (SBR), oil extended styrene butadiene rubber (oSBR), acrylonitrile butadiene rubber (NBR) and ethylene propylene diene rubber (EPDM). Results showed, that CBT acted as an effective l...
full textPreparation and Properties of Bacterial Cellulose/Alginate Blend Bio-Fibers
Correspondence to: Shuai Zhang email: [email protected] ABSTRACT LiOH/urea/thiourea aqueous systems have been successfully applied to the dissolution of bacterial cellulose (BC) and alginate (AL) to prepare blend fibers. Morphology, compatibility and mechanical properties of the blend fibers were investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT...
full textThermo stabilisation of poly (butylene adipate-co-terephthalate)
Poly (butylene adipate-co-terephthalate) PBAT is a synthetic biodegradable polymer commonly used for plastic film production from neat polymer or nanocomposites. The PBAT is submitted to high temperatures and shear rate during its processing. In the present study, the thermo stabilisation of PBAT by the addition of two types of stabilisers was studied using a torque rheometer at 60 rpm and two ...
full textMy Resources
Journal title
volume 29 issue 3
pages 77- 81
publication date 2010-09-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023